7 new generation lighting concepts come out: This is the future lighting

In the "Lighting Fair 2015" (March 3, 2015 ~ 6 day in Tokyo International Convention and Exhibition Center held the exhibition organizers) the planning activities of "Coreca Light", a number of participating enterprises in Japan released its picture of the future of lighting concept. Here are a few specific proposals.

An organic EL panel has three functions

NEC lighting is on "organic EL, architectural lighting concept, sora_terasu."". The idea is based on the idea of developing a large area of transparent organic EL lighting panels equipped with efficient solar power in the future, which will be used as a skylight for residential buildings. The organic EL lighting panels will be used for solar power generation during the day, and will be used as a transparent skylight, where the electricity generated during the day will be used to illuminate the interior.

In the exhibition case, NEC lighting displays a housing model that uses translucent organic EL lighting panels during the day as skylights and provides lighting during the night.

Mt Fuji lighting plan

Iwasaki electric fought the big lights in Mt Fuji!!" As a theme, a demonstration of the Mt Fuji stereo model was carried out. In addition, rock electric also illuminates what lighting fixtures are needed to illuminate the whole of Mt Fuji.

Verification shows that, in order to effectively illuminate the Mt Fuji, it is necessary to set up 10 thousand and 250 rock electric appliances at three points near the mountainside in Mt Fuji. The luminous flux is 35 thousand LM and the power is 380W. The required cost is 3 billion 500 million yen, and the electricity bill is 100 thousand yen per hour.

However, it is reported that in 2035 20 years later, 1 sets of light projector will have 1 million 200 thousand LM luminous flux, luminous efficiency will be as high as 250lm/W. At this point only 448 sets of light projector can.

Implementing RGB tricolor by lighting?

Toshiba lighting technology is on display "make life fun lighting" concept, through the red (R), green (B), blue (G) 3 primary color spotlight to achieve lighting.

Lighting fixtures, integrated cameras, microphones, speakers, sensors, and thermometers

IRIS showcased the integration of our new concept of camera, microphone, speaker, sensor, light sensor and temperature sensor of the lighting device and lighting. The camera can recognize people's faces, expressions and actions, provide monitoring and housekeeping functions. The temperature sensor automatically transfers the measured temperature data to the air conditioning system. The user can turn on or off the light fixture by voice, and adjust the light.

Lighting fixtures will not be available in the future

Lighting manufacturers Koizumi lighting description is to "building that is lighting"?" As the theme, lighting appliances, this concept no longer exists in the future life. In the future, lighting fixtures will be integrated with buildings, and ceilings and walls can be directly used as lighting fixtures or displays. Of course, you will be equipped with full color dimming palette.

Koizumi lighting through the application of the above concept of the model, the realization of the use of LED and light panels for light-emitting ceilings and walls.

The bulb gives off an aurora color

The idea of MITSUBISHI motor lighting is "shining the light"". Specifically, a light bulb that shines like an aurora is on display.

Roma exhibits new lighting fixtures to make sense sensors invisible"

The existing human sense sensor detects the heat generated by the human body through infrared rays, so that the sensor is exposed to the outside of the appliance. The new lighting device and the display can be built by Roma in the lighting sensor, the sensor adopts 2.4GHz band waves, reflection waves according to the detection of human existence. The sensors will work even if they are placed in the glass cover of the luminaire. New products by using Doppler frequency shift (Doppler Shift) to detect the frequency fluctuation of the reflected wave, so long as it does not have metal shielding articles covering the waves, will be able to grasp the existence of human body with high accuracy (activities).

The new product will be used for devices that want to present a concise design to the user, as well as the use of sensors that do not want users to notice the presence of the sensor. Rom believes that this product can reduce the sun, humidity, dust and wind and other conditions surrounding the emergence of misoperation, so also hope to take advantage of this feature, open up new uses. The size of the sensor is about 2cm square.

For more LED related information, please click on China LED network or pay attention to WeChat public account (cnledw2013).