English: 中文版 ∷  英文版

Industry news

AOP outdoor lighting

Application:

This product is suitable for outdoor lighting, such as alley lighting, park lighting, solar lighting and road lighting.

Characteristic

1 optical design

The product is designed using bat beam mode, and is the second category of IESNA, short wave and can be cut off. The pole spacing can be as high as 4 mounting heights and has a uniform illumination distribution.

2 power

This product adopts the switch mode and multi-channel constant flow design, normal operation to drive a single LED series circuit, to ensure that the LED constant current load. In addition, the lamp also has the function of overheating and overvoltage protection, the use of automatic thermal compensation technology to ensure the service life of LED. DC to DC power efficiency up to 89%.

3 heat

The lamp was designed to optimize heat dissipation, when the ambient temperature at 30 DEG C, and when the air in the stationary state, the surface temperature can reach 55 DEG C, a temperature change of 2 DEG C of the heat dissipation base, and the LED junction temperature control at 70 DEG C. Due to the temperature of the cooling base can reach 70 degrees C, therefore, the lamp is designed with overheating protection, LED current with automatic adjustment function.

4 luminaire efficiency

The lamp has ultra high brightness, the total energy efficiency of the lamp can reach 74.5lm/W (excluding AC to DC circuit energy consumption).

Source: LED 083 (BT) x 24 Nichia EA

Beam angle: II, short wave, can cut off

Color temperature: 5200 + 400 / 3000 + 300K

Input voltage: 12Vdc or 24Vdc

Power consumption: 26W

Working temperature: -30 degrees C~50 degrees C

IP level: IP65

Net weight: 2.1kg

Output lumens (typ): 1789/1430 (http://www.ledsmagazine.com/products/18959)

Scan the qr codeclose
the qr code