DIY creativity of crooked nuts: IKEA lamp, large lamp ball

Lei Feng Internet news IKEA IKEA lamp is a classic desk lamp. A foreign friend bought some of them to transform them, and made a large spherical lamp. The result is quite good.

Below is the process of the combination of 6 Rahm lamps, which can theoretically achieve 120 versions. But if you really want to do it, there are 3 problems: too heavy, too bright, and another point is the need for rigorous structural mechanics calculation. If you are interested in this edition, you can try it by yourself, as an extracurricular exercise.

So how to transform the desk lamp?

Step one: Tools

Before you start, you have to prepare the tools shown above. First use the iron to burn a hole on the lampshade, then connect the lampshade with strapping. Then use the thread to fasten the thread. Of course, the way of fixing the line does not know this type, and you can also achieve it in other ways. You can put the lamp on the clothes rack and hang it on the roof.

The second step: unload the bulb.

Unload the bulb and remove the wires. Then these six lampshades are combined into a tube.

The third step: burn holes on the lampshade with iron.

Think about the one you want to make, then mark it with a marker pen and put a hole on it with the iron, so that the strapping can be passed from the middle. Although it is not very good to burn plastic in the house, at least it is easier than drilling. Remember to open windows and ventilate when burning.

The fourth step: wiring.

Peel off the power cord and connect the wire to the thread button (blue to blue, brown to brown). Then connect the four line buttons 22 with the front power cord.

The fifth step: linking the bulb.

The main step is to use the strapping tape to connect the bulbs. Remember to leave your knot outside when knotting, so that you can tighten up. Don't tighten the strapping tape when you start to pick up. When all the bulbs are connected, tighten these straps. Remember to put a coat hanger in the middle and hang it on the roof.

The sixth step: success.

The version of the 12 lamp is the most beautiful, and the production process is very simple. Of course, the author of the 32 edition did not do it. If you are interested, you can try it by yourself.

For more LED related information, please click on China LED net or pay attention to WeChat public account (cnledw2013).