DIY idea of crooked nuts: IKEA desktop light bulb

Lei Feng Internet news IKEA Rahm desk lamp is a very classic desk lamp, a foreign net friend bought some of them to transform them into a large spherical lamp, the effect is quite good.

The following is the process of the combination of the 6 Rahm, the largest in theory can do 120 versions. But if you want to do it, there are 3 problems: too heavy, too bright, and one thing that requires particularly rigorous structural mechanics. If you are interested in this version, you can try it yourself as an extracurricular exercise.

So how do you change the desk lamp?

First step: Tools

Before you start, you have to prepare the tools. First, burn a hole in the lamp cover with a soldering iron, and then tie the lampshade together with a strapping band. Then the thread fasten the line, of course, the method of the fixed line does not know this one, you can also achieve the purpose in other ways. You can put the lamp on the hanger and hang it on the roof.

Second step: unload the bulb

Unload the bulb and remove the wires inside. Then the six lampshade is made up of a tube.

The third step: burning a hole with a soldering iron on the lampshade

Think of the one that you want to do, and mark it down with a mark pen on the lampshade, and branding a hole with a soldering iron, so that the band can pass through the middle. Although it is not very good to burn plastic in the house, it is at least easier than drilling. Remember to open the window when it is burning.

Fourth step: connection

Peel off the power cord and connect the wire to the line (blue, brown and brown). Then use the front power line to connect the four lines to 22.

Fifth step: link light bulb

This step is mainly to tie the bulb together with a strapping band. Remember to leave the knot outside, so it is convenient for you to tighten up. Don't tighten the straps at the beginning of the connection, and wait until all the light bulbs are connected. When you pick it up, remember to plug a hanger in the middle and hang it on the roof.

The sixth step: the success

The version of the 12 lamp is the most beautiful, and the production process is very simple. Of course, the 32 version of the author did not do it, just look at yourself. If you are interested, you can try it by yourself.

For more information on LED, click on the Chinese LED network or pay attention to the WeChat public account (cnledw2013).