Development of new fire LED sight lamp using fluid driven emergency lighting technology platform

In case of fire, firefighters are not only holding water Posts far away from the water, but often have to enter the scene without electricity or lighting to find fire spots to put out the fire source. Firefighters must bear more than 30 kilograms of clothing and equipment in the air, which is thick and smoother and dark. It is hot and scorching and full of burning residues. At this time, the water line on hand is the only "help" line for fire brothers.

In order to give firefighters more help on this rescue line, Taiwan Institute of technology developed "fluid driven emergency lighting".

Liao Ronghuang, a green energy and Environment Research Institute of Taiwan Research Institute, applies turbine rotor energy saving power generation technology to the lighting solution of the fire field, and applies a turbine generator to the fire control sight, and uses the fire water to turn the turbine to power the LED lamp attached to the fire control sight. Electricity; in addition, the use of small lithium batteries to store electricity, can continue to provide lighting without the need to spray water column.

The fire aiming lamp developed by Taiwan Institute of technology "fluid driven emergency lighting" has a brightness of more than 25000 candlelight. It is 10 times of the general headlamp and 5 times of the chest lamp. After continuous improvement, the weight of the sight lamp has been reduced from the first generation of metal and weighing 3 kg to the current heat resistant plastic material. Only 800 grams of fourth generation aiming lights.

To facilitate loading and unloading, the fire control sight lamp developed by the research institute is designed with a quick connection design. It can be assembled in only 30 seconds, and the joint can be rotated to change the direction of light at any time, and also for left-handed firefighters.

The fire aiming lamp can be directly installed on the existing fire control sight without changing the equipment, so that the user's acceptance can be improved. At present, Keelung, Taipei, Tainan and other places fire brigade has begun to use this product, and the Institute of industry and technology has actively carried out the layout of the patent. It is necessary to extend this good product to the whole world, and provide adequate lighting for the high tension fire scene, so that firefighters can also save themselves more lives and at the same time make themselves safer.

For more LED related information, please click on China LED net or pay attention to WeChat public account (cnledw2013).