Do not choose healthy LED lights? Look at these 5 points

According to Sina reported that in recent years, as people's awareness of health lighting, more and more people began to pay attention to and buy healthy LED lights. But in the face of a variety of LED lights on the market, how to choose, how to choose has become a headache for many consumers. Today, Xiao Bian will share a few tips for you to buy, hoping to help you buy a healthy LED lights.

One look chip

One look chip

The chip is the core of LED light emitting element, different brands, different types of lamp luminous efficiency and color rendering index are different. Now on the market most of the lamps are single chip, integrated chip is also known as the COB chip, the performance is better than a single chip. So in the purchase, as far as possible to choose the COB chip, not only long service life, but also luminous efficiency, color rendering index are relatively high, the use of occasions is also more extensive.

Two color temperature

Two color temperature

Different lighting places, such as bedroom, living room, kitchen and bathroom lighting requirements are not the same, this time you can look at the color of the Led lamp to choose. LED lamp color temperature range of 2700~6500K, the smaller the value of bias yellow light, and vice versa, blue white light. The most suitable LED lighting color temperature range should be close to the sun, natural white color temperature range is the most scientific choice in daily Home Furnishing lighting incandescent lamp can choose 2700K or 5000K color neutral white; in addition, the lights are not more white the better, high color temperature light near the glare of the sun at noon, irritating to the eye too strong, and low temperature are prone to fatigue, only comfortable color temperature of light is lamp.

Three see luminous flux

Three see luminous flux

Luminous flux refers to brightness. Different environments, different areas of the need for different light. At the same level, the number of bulbs used varies depending on the environment. Can be purchased according to their own needs to consult the shopping guide. Selection of lamps, the need to combine the lighting environment, refer to the product's luminous flux index, or pay attention to observe the brightness of the light, as far as possible to choose a bright enough but not dazzling lamps.

Four color rendering index

Four color rendering index

Look at the color index is to see the object in the light of the color of the true degree, the value is generally 0 - 100, and now the LED bulb color standards are more than 75, it is recommended to choose more than 80 better.

Five strobe test

Five strobe test

Recommended to see whether the purchase of LED lights strobe, stroboscopic lamps will have an impact on vision. Stroboscopic is the naked eye is difficult to detect the problem, you can use the phone to shoot the lights, if the photo appears gray and white stripes like it shows that there is no stroboscopic, if there is no stripe is no stroboscopic.

In addition, the choice of LED light source products, health, safety is the key. Therefore, the best choice in line with national safety standards, quality products.

For more information about LED, please click on China LED network or pay attention to WeChat public account (cnledw2013).