Four lighting products related national standards for approval publicity

According to the Ministry of industry and information technology division released in July 24, 2017 29 "light industry, electronic industry and electronic industry standard 3 national standard approval publicity", of which there are 4 light industry standard and relevant information about the standard of lighting products, are as follows:

(1) QB/T - "2516-2017"

The main contents of the standard: this standard specifies the standard of classification and naming, basic parameters, main dimensions, requirements, test method, inspection rules and signs, packaging, transportation and storage etc..

This standard is applicable to the power of 3500W and below, with a transparent glass lamp. The lamp according to different specifications by 220V or 380V, the frequency of AC power supply 50Hz, used to meet the requirements of annex A reference ballast and trigger in the rated supply voltage of 92% ~ 106% range, can start and operate normally.

(2) QB/T 5207-2017. Requirements for adding krypton, -85 and thorium -232 in lighting products

The main content of the standard: this standard specifies the maximum allowable content of krypton, -85 and thorium -232 in lighting products.

This standard applies to the following lighting products:

The metal halide lamp or arc tube;

The short arc lamp;

The xenon short arc lamp;

The road motor vehicle bulb.

(3) QB/T 5208-2017, method of evaluating the color rendering of white light source

The main content of the standard: this standard specifies the calculation method for evaluating the color rendering of white light source with two measurement parameters, including color fidelity index Rf and gamut index Rg. This standard applies to indoor and outdoor lighting with a bright vision level, white light source and lighting system based on general lighting.

(4) QB/T 5209-2017 performance requirements for integrated LED lamps for decorative lighting

The main content of the standard: this standard specifies the product classification and nomenclature, requirements, test methods, inspection rules, signs and packaging requirements of integrated LED lamps for decorative lighting. This standard applies to home and similar places as decorative lighting, the LED light source and stable ignition components integrated into one of the non directional integrated LED lamp.

The scope of application is as follows:

The rated voltage AC220V, frequency 50Hz;

The with GB/T 1406.1 screw type lamp holder or the bayonet caps with GB/T 1406.5;

The size meet the requirements of GB/T 7249, the appearance of the maximum lamp diameter not greater than 50mm.

Any lamp meeting the requirements of this standard shall be able to start up and operate properly at ambient voltage between 92% and 106% or the nominal operating voltage range between -20 and 45 degrees centigrade.

For more LED related information, please click on the LED network or pay attention to the WeChat public account (cnledw2013).