Four lighting products standard for approval of relevant national publicity

According to the Ministry of industry and information technology division released in July 24, 2017 29 "light industry, electronic industry and electronic industry standard 3 national standard approval publicity", of which there are 4 light industry standard and relevant information about the standard of lighting products, are as follows:

(1) QB/T - "2516-2017"

The main contents of the standard: this standard specifies the standard of classification and naming, basic parameters, main dimensions, requirements, test method, inspection rules and signs, packaging, transportation and storage etc..

This standard is applicable to the power of 3500W and below, with a transparent glass lamp. The lamp according to different specifications by 220V or 380V, the frequency of AC power supply 50Hz, used to meet the requirements of annex A reference ballast and trigger in the rated supply voltage of 92% ~ 106% range, can start and operate normally.

(2) QB/T "5207-2017 lighting products to add -85 and -232 limit value of krypton thorium requirements"

The main contents of the standard: this standard provides lighting products to add -85, the maximum allowable concentration of krypton thorium -232.

This standard applies to the following lighting products:

The metal halide lamp or arc tube;

The short arc lamp;

The xenon short arc lamp;

The road motor vehicle bulb.

(3) QB/T 5208-2017 "white light color evaluation"

The main contents of the standard standard for the evaluation of white light color with two measurement parameters calculation method, including color gamut Fidelity Index Rf and index Rg. This standard is applicable to indoor and outdoor lighting based on vision level, ordinary lighting based white light source and lighting system.

(4) QB/T 5209-2017 "decorative lighting integrated LED lamp performance requirements"

The main contents of the standard: this standard specifies the classification of products integrated LED lamps for decorative lighting and naming, requirements, test method, inspection rules, signs and packaging requirements. This standard applies to non directional integrated LED lamps for household and similar places for decorative lighting, LED light source and light stable component integration.

The applicable scope is as follows:

The rated voltage AC220V, frequency 50Hz;

The with GB/T 1406.1 screw type lamp holder or the bayonet caps with GB/T 1406.5;

The size meet the requirements of GB/T 7249, the appearance of the maximum lamp diameter not greater than 50mm.

Those who meet the requirements of this standard lamp, in the rated supply voltage of 92% ~ 106% or the nominal operating voltage range, the ambient temperature is -20 DEG to 45 DEG between the conditions should be able to start and work normally.

LED more information, please click on the LED network or the WeChat public account (cnledw2013).