In Zhejiang, the incandescent lamp and the LED lamp for the halogen energy saving lamp should be selected as "four views"

Zhejiang Province recently proposed the implementation of the comprehensive prevention and control of heavy metal pollution this year, the comprehensive ban on the elimination of incandescent lamps, halogen energy saving lamps, and the prevention and control of metal pollution into the assessment of the content of cadres. At the same time, we should focus on the improvement of the energy saving lamp industry.

In addition, our country will prohibit the sale of incandescent lamps for ordinary lighting of 100 watts or more. According to the previously published "China phase out incandescent lamp road map", China will gradually ban the import and sale of ordinary lighting incandescent lamps from the stage of October 1, 2012. By October 2016, more than 15 watts of ordinary lighting incandescent lamps will be forbidden to be imported and sold, and industry and commerce departments will investigate and deal with the illegal selling of incandescent lamps according to law.

Select the LED light for "four see"

With the LED light more and more "eat fragrance", the variety of styles on the market let consumers have no way to start, so how to select high quality LED lights?

The first step is to see the outer packing of the LED lamp. The state is required for the outer packing of the LED lamp, which must be marked with rated voltage, voltage range, rated power and rated frequency. The quality of the LED lamp products with good packaging and printing quality, clear handwriting, wet cloth wiping is not easy to be erased, poor quality products printing, fonts are fuzzy, some products even have no manufacturer logo, and no relevant certification marks.

The second step is to watch the LED lamp. A number of LED lamps of the same product are put together to watch, high quality manufacturers generally have good consistency and will not appear unevenness and other conditions. The interface of high quality LED lamp and the spiral port have a section of slope, which is convenient to install, prevent the installation staff from electrocution, and some of the poor quality LED lamp interface is rounded, and there is a hidden safety hazard. In the spiral buckle slightly wrench, the interface if loose, indicating the quality of the problem, should not be purchased.

The third step is the temperature. The LED lamp is placed on the electric seat for a few minutes. The temperature of the LED lamp is rising slowly and the temperature is low with the hand. If the temperature is high, the life of the LED lamp will be affected, and it will not be purchased.

The fourth step, the interference test. When working in the LED lamp, you can turn on the radio and put it near the LED lamp. The lower the noise the radio sends, the better the quality of the LED lights.

For more information on LED, click on the Chinese LED network or pay attention to the WeChat public account (cnledw2013).