Even if it is not riding enthusiasts must understand this truth, in the case of the environment is relatively dark, you want to be able to see others not only with the light, but also hope that others can clearly see you. In order to ensure a higher safety factor. Although there are a lot of lighting products on the market, but the Australian Knog company produced Frog LED can be described as one of the best.
About Knog brand
It is said that a little deeper riding enthusiasts are familiar with the Australian Knog company, Knog is Australia's top design team carefully crafted brand. Kong company's products can not be highly praised in the bicycle industry, in the civilian field is also widely loved by consumers. Kong company's products include bicycle accessories, bicycle lights, bicycle gloves and bicycle bags and many other products. Among them, many products have received a number of international awards. Take the experience of Frog, it was too much iF design award, EuroBike product design award and Australian Design Award awards.
Experience the charm of Knog Frog
Frog LED is made of silicone material, making it stand out among the many products. First of all, the integrated design can quickly put the LED lights according to the actual situation in any place on the bike or even on the helmet. At the same time, save the installation and disassembly process convenient you worry about stolen feelings to the destination to take down the back and then loaded on both; secondly, because silicon resin sealing is good, and the Frog LED in addition to replace the batteries outside the site are fully sealed design, can still use the downpour and other inclement weather environment finally, the silicon resin material; the cold and heat, can be minus 40 degrees Celsius to 220 degrees Celsius environment safe and sound.
Of course, the use of Frog LED control of the process is also our concern. Frog LED design with concealed switch, only the upper light pressure lamp can control the light emitting state, click open LED lighting, LED lamp switch to flicker to click, and then click the LED that can turn off the lights. Such a simple manipulation, even in the more complex ride process can also control. Moreover, Frog LED has a flashing state is necessary for bicycle lights, can make it easier for other pedestrians to see you.
Bicycle lamp durability also determines the quality of a product to some extent. Citing official data, Frog LED in full bright state for a period of 80 hours, while the state of continuous use of flash for a period of 160 hours. Even if you use the full bright state more than 2 hours a day, count a pair of CR2032 button battery is also more than a month's time. Are you still worried about holidays when you go out riding Frog LED strike?
Even if the Frog LED has many benefits, but we are still worried about its petite body (8.5 cm x x width of 3.4 cm * high of 4.5 cm) can not provide enough brightness. We also tested the idea in order to dispel this concern. In the light of the day, we stand on the balcony to open the Frog LED light. Under such conditions, the light emitted by the Frog LED lamp also makes me feel rather harsh. Therefore, we believe that Frog LED can provide enough brightness to meet the general application. Although Kong provides more than LED products for consumers to choose, but we feel that there is no need too much. Even though Knog claims that Frog LED visibility is still 600 meters away, the effective lighting range is limited to a few meters to meet the general lighting needs.
Frog LED after experiencing the wind and rain will inevitably be stained with a lot of dust, but even dirty with a long time Frog LED luminous brightness will not be affected. Moreover, the use of silicone material Frog LED, with a towel to wipe immediately restore the initial state. Finally, it is recommended that you can install a Frog LED before and after the bike. Of course, you can choose two different colors to experience different feelings.
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China