Lightech introduces phase control dimming LED driver to expand production line

Lightech ELectronics launched its new product line, which is phase controlled dimming LED driver, and to expand its production line, this series of products can be driven by the current rating of 350mA, 500mA and 700mA. Products include LED-18-350-120-D, LED-26-500-120-D and LED-36-700-120-D.

These drives are designed to be used in the interior of the LED lamps, which can directly drive the 120V AC power cord. They can make the LED lamp dimming, the use of the most common dimmer, the degree of darkness is only fully bright 0.1%. The product can be supported by standard triac (TRIAC) dimmer or reverse phase control dimmer (trailing edge dimmer).

Due to the controllable light range of the driver is from 100% to 0.1%, which means that the same lamp can be used as a luminous lamp, or can also be used as an indoor lighting.

The driver can drive up to 12 LED, driving at least 3. 12 series LED can get the most effective dimming effect (0.1%). The 6 series LED dimming effect is 0.5%, the effect of the dimming of the 3 series LED is 1%.

In the output current, the output ripple of 120Hz is usually less than 2%. For safety reasons, the output current is electrically isolated and conforms to UL 2 certification.

These products have a complete protection function, can prevent the output short circuit and open circuit, and has a fully automatic reset function. In addition, these products also have a complete overload voltage surge protection device to prevent the power line from the impact of lightning.

These products have been certified by the FCC B consumer electromagnetic interference.

These drives have been recognized by CREE, which can be used to drive Cree's LED.

On the normal use of the 18W driver, its expected life expectancy will be more than 10 years. (http://www.ledsmagazine.com/products/19035)