ROHM development LED seamless standard top studio lighting R-CK001

ROHM semiconductor manufacturing company, the development of the use of a new generation of energy-saving LED, suitable for convenience stores and other shops and office lighting, for the industry's ultra-thin ceiling seamless standard lighting R-CK001. This product began to supply samples in late 2009 3, will be in the same year in May began mass production.

Prior to mass production, this product was adopted by the environmental province to recruit energy saving lighting design model business activities, most of the store lighting to LED lighting convenience stores as lighting equipment testing.

As the ends of the joint without the socket part, can show the beauty of the seamless lighting is a large number of shops in recent years by the use of standard lighting (all space lighting). At the same time, under the high awareness of environmental protection, for 24 hours of convenience stores, such as store lighting, the market is also a big demand for power saving, long life, low power LED lighting.

In this environment, ROHM uses LED to develop a thin seamless standard lighting R-CK001. This product is part of the use of light-emitting ROHM original power LED configuration, the use of the original ROHM optical design, so that the proliferation of light energy is not uneven uneven spots, to achieve a natural uniform brightness. At the same time, due to the miniaturization of the power circuit to achieve all of the height of the 38mm industry ultra-thin ceiling LED lighting, coupled with less pressure on the design of the device, the ceiling of the high degree of control to make the lighting design easier.

85% conversion efficiency of the power supply circuit, and high efficiency power supply voltage through the business changes (about 20% +) and not by the surrounding temperature change (-20 C +80 C) constant current, which is to use the power circuit design technology unique to ROHM.

In terms of energy saving, the power consumption of the power circuit is 24W, compared with the general fluorescent lamp (40W straight tube fluorescent lamp type), the following illumination (below 1m) is 1.3 times, the power consumption of the power circuit is reduced by 52%. Moreover, the life expectancy of about 40 thousand hours is about 3 times that of a fluorescent lamp, which is a lighting device that contributes to the environment.

ROHM continuously improve LED equipment technology, installation technology, circuit board design, inherent technology optical design, as the unremitting efforts contribute to the LED development environment for manufacturing semiconductor lighting factory, the future of the wall lighting using R-CK002 of LED lighting equipment to contribute.