Recom company is located in New York, Broolyn, has launched a new series of constant current LED driver RCD, the maximum current limit is 1200mA, and meet the new generation of high brightness LED needs. RCD driver DC input voltage range is 5V-36V, RCD-24-1.0 DC converter can provide maximum stable current of 1A, RCD-24-1.2 DC can provide maximum current of 1.2A. The module size is 22 x 12.5 x 8.5mm, but it has not yet been completed plug (plug-n-play) component, the component without external components, therefore, compared with the optional can reach 50% separate solutions, so it can reduce the area of the circuit board.
The RCD series has two independent dimming input: a pulse width modulation (PWM) control, can be used to connect the microprocessor and digital controller interface is simple; the other is the analog voltage input, suitable for lighting controller or dimming rheostat. The two dimming inputs are linearly adjustable, and the adjustable range is 0%-100%. PWM input can also be used to turn off the converter, can only extract 200 A power supply.
Use the LED drive RCD Series in complex feedback control circuit can ensure optimal regulation, implementation of the load current so that the stability of the LED output current is about 1%, the remaining output ripple is less than 200mV, and the efficiency is as high as 96%. The driver of the internal power consumption is only 800mW, in the external environment, the operating temperature of -40 degrees C ~ +71 C (1000mA), as well as -40 degrees C ~ +65 C (1200mA). The driver also has a circuit protection and shut off overheating protection function.
The driver is designed to be as reliable as when LED is driven, and does not contain electrolytic or tantalum capacitors.
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China