Take the mini projector LED high light source can counter attack

LED light source problems highlight the high-end configuration of the projector, and has always been a hot issue in the industry. Ultra high pressure mercury lamp tradition in various fields have no technical advantage. At present only the cost and maturity problem, let the traditional lamp light source to survive, with the continuous development of new light source technology, the future will gradually light bulb in various fields in an awkward position. In the end, the laser light source development time of three or four years, in 2015 the laser source has been greatly progress, various brands are pushing high-end laser projector. Take the mini projector LED light source can counter attack? LED is the projector after several years of brewing, from the initial brightness of 50 lumens, the average level of development to now can reach 700 lumens, and even some of the larger LED projector also challenge 1000 lumens. Can be said that the development speed of LED light source is not slow. But the problem is also a lot of light, the light source used in most micro projector field, large heat and low brightness, high cost has become a urgent problem. At present, the development of faster laser micro projector itself positioning is more awkward, as consumer products, the user group is not always large scale. After all, the home market occupies in the entire projector market proportion was relatively low. The micro projector is also home projector branch. Itself development channel is narrow, so micro projector can not become powerful hotbed of growth of LED light source. The new scheme is faster 3500 lumens need to focus on why the laser source development? In fact, because in this area, the demand of Engineering projector is greater, so the carrying capacity of technology is stronger. The price of your single projector, and there are a lot of demand in the market, whether it is a large project, or in the field of film projector, laser products have great demand. While the micro projector is considered by many people as "toys", there is no real market demand, which makes the development of the LED light source is somewhat weak. The traditional light source will be eliminated so the development of the LED light source also need to find a new hotbed, which is 3000 to 4000 lumens of market. This market is currently the largest shipments market. Is due to the brightness of LED light source, laser light source of the cost is too high, so the market is mainly the traditional lamp light source market. Of course there are many manufacturers to try laser source + phosphor pattern, but the brightness of the light source can achieve demand of brightness, but the picture is always some partial color. It has not become the mainstream of the industry, now it seems this hybrid light source or a transitional technology. Three LED light source can meet the new market demand how in the light of innovation? However, with the launch of Hitachi's 3500 lumens projector teaching, as well as BenQ and Optoma launched the RGB LED 4K projector, show LED has highlighted a new solution. Although the project cost is still relatively high, but there is no doubt that it has shown potential for development in the field of 3000 lumens. LED light source advantage, long service life, pure color, stable and so on, these advantages make LED become an important force in the field of light projector. Although in and laser competition, has lost the advantage in the field of high-end. But in the traditional field of 3000 lumens, a miniaturized laser has a technical difficulty, and the LED light source is first to achieve this. At present, how to reduce the cost, the light source can become LED micro projector from the field, enter the key just broad market. The key period of 2016 is LED high light source development. LED high light source will become an important configuration of 3000 lumens of high-end models.