The "price war", one can fix LED lamp belt

Modern owners pay attention to the overall Home Furnishing decorative effect, Home Furnishing lamps as lighting products, while the room plays an irreplaceable role in decoration. LED lamp with a riot of colours by modern owners alike, the owners can choose according to their own preferences to color, to create a different Home Furnishing effect. Many owners of the lamp with a lamp with fever is not very understanding, what is the reason? How to install the lights? Light in the maintenance need to pay attention to what?

A LED lamp with specifications and characteristics

Conventional round wire, round three lines, flat three lines, flat four line etc.;

Colors are red, green, blue, yellow, white, colorful.

Diameter: 10mm---16mm.

Characteristic

1, soft, just like wires can curl.

2, shear and extension.

3, the bulb and the circuit is completely encapsulated in flexible plastic, insulation, good waterproof performance, safe use.

4, strong weather resistance.

5, it is not easy to break, long service life.

6, easy to make graphics and text modeling; at present it has been widely used in buildings, bridges, roads, gardens, courtyards, floor, ceiling, furniture, cars, ponds, water, advertising, signs, signs, lighting and decoration.

Two, LED lamp belt installation method

1, indoor installation:

LED lights for indoor decoration, because of not having to undergo the installation is very simple so exposed to wind and rain. Behind each LED lamp belt are affixed with self-adhesive 3M double-sided adhesive, the installation can be directly off the surface of the 3M double-sided adhesive stickers, and then the lamp strip is fixed on the installation place, hand press flat is good. As some places need angle or long how to do? Very simple, LED lamp belt is a 3 LED circuit structure of series parallel group, each of 3 LED that can be used alone to cut.

2, outdoor installation:

The outdoor installation will withstand wind and rain, if the use of fixed 3M glue, a long time will cause the decrease of the 3M adhesive LED lights off, so often used for outdoor installation fixed card slot, need to cut and connected place, method and indoor installation, just need another with waterproof glue. In order to consolidate the connection point of the waterproof effect.

3, the power supply connection method:

General LED lamp with voltage is DC 12V, necessitating the use of switching power supply, power supply according to the size of the power LED lamp belt and connected to fixed length. If you do not want to take each LED lamp with a power to control, switching power supply can buy a relatively large power for the total power supply, then put all LED light with all input power in parallel (wire size is not enough, can also extend) unified by the total power switch. Such benefits can be centralized control, convenient place is light effect can not achieve a single LED lamp belt and switch control, which can measure by yourself.

4, the controller connection mode:

LED and RGB lights with marquee with the need to use the controller to achieve varying effect, while the control distance of each controller is not the same, in general, simple controller for 10 control distance to 15 meters, distance control remote controller is 15 to 20 meters, the longest can be controlled to a distance of 30 meters. If the connection is long distance LED light belt, and the controller cannot control as long as the lights, then you need to tap the use of power amplifier.

5, pay attention to the connection distance LED light belt:

In general, LED lamp 3528 series with its connection with the longest distance is 20 meters, LED lamp 5050 series with the longest connecting distance is 15 meters. If the distance is beyond the scope of this connection, the LED lamp belt is easy to heat, will affect the service life of the LED lamp with the use of the process. Therefore, when the installation must be installed according to the manufacturer's requirements, do not let the LED lamp with overload operation.

Three, LED lights with a note

1, the brightness of the different requirements for different occasions and different product requirements to LED brightness. For example, LED jewelry cabinet lamp if placed in some large shopping malls, we have some high brightness is attractive, but is also a LED decorative lamp and LED colorful lights with different products.

2, antistatic ability: the antistatic ability of the antistatic ability of the LED, long service life, but the price will be higher. Usually the best antistatic above 700V.

3, the wavelength and color consistent LED color will be consistent, the mass combination of the lamp is especially important. With a lamp which do not produce color too much.

4, the leakage current is LED when conducting reverse leakage current, we propose to use the smaller LED products.

5, waterproof, for indoor and outdoor LED lamp is not the same.

6, LED light angle have great effect on the LED lamp, a huge demand for different like lamps, LED fluorescent lamp, we suggest that the 140-170 is put into. We also give a detailed account of the other is not here.

7, ED chip LED core LED chip quality decision, many brands, there are foreign brands (such as CREE, etc., have China Nichia) in Taiwan (such as Guangjia, Jingyuan etc.). Different brands of the price difference is very far.

8, LED chip size also determines the quality of LED and brightness in the choice of when we also try to choose a chip, but the price difference.

Four, led LED lights with fever for 2 reasons

1, line design problem: LED lights with the most commonly used specification is 12V and 24V two kinds of voltage, 3 12V on multiple parallel structure,