We launched PLN-20 and PLP-20 series 20W LED power supply

In order to meet the application requirements of low wattage LED lighting / decorative light source, we launched a new PLN-20 and PLP-20 two series with power factor correction 20W LED power supply. PLN-20 is a dustproof and waterproof function of the plastic insulation shell exchange power supply, and the other is a PLP-20 type (open frame) products without chassis. PLN-20 through the way of structural design to achieve the IP64 requirements, save glue cost, while PLP-20 in removing shell and miniature PCB design, save the shell body parts, and two series of products can maintain a low cost, is currently meanwell LED power series with PFC function in the lowest wattage of the aircraft. Can fully meet the application system of various low wattage lamps, low price.

In order to reach the standard of lighting competition in power factor on the requirements and consideration of low wattage LED / Lighting decorative lamp market, PLN-20 and PLP-20 using a single stage PFC architecture in the circuit design, in the most economical way to achieve a high PF value (PF = 0.9) requirements and meet the EU EN61000-3-2 for harmonic current the Class C class (requirements on the output load is more than 75% under the situation, meet the needs of general lighting) applications. In addition, the two series of the highest efficiency of up to 83.5%, so it can only use natural air-cooled cooling full load in the -30~+60oC, combined with the closed loop operating environment of the high temperature characteristics. The output current can be adjusted in the range of 75~100% rated current by the built-in variable resistor, which greatly increases the flexibility of the system design. Other standard features include short-circuit protection, overload protection, over voltage protection and over temperature protection, and in the input and output is equipped with a power line 18AWG/30cm, the convenience of users in all kinds of flexible assembly system or work place. The two series also passed the TUV / UL / CUL / CE and other international certification, which includes UL8750, EN61347-1, EN61347-2-13 and other lighting regulations, so that you use safe without fear.

Product characteristics

Wide range 90~277VAC AC input voltage (available in North America for use in 277VAC)

Built in active PFC, which meets the requirements of harmonic current EN61000-3-2 C (above 75% load) (Class)

When the output load is more than 75% PF>0.9

IP64 high dustproof and waterproof grade (PLN-20)

Output current can be adjusted according to requirements

Natural air cooling

Protection function: short circuit protection, over load protection, over voltage protection, over temperature protection

Low price, high reliability

Certification: UL8750, EN61347-2-13, EN55015, EN61547 and other lamps related to the application of laws and regulations

Dimensions (length x width x height): PLN-20:147x 37x 28mm; PLP-20:140x 32x 22mm

2 year warranty period