Wood wood and other five enterprises T8 lamp violence dismantling

If the price is PHILPS lamp price war precursor, then 9 yuan, OPPLE T8 lamp as the Buddha, Linsen, the price war to a climax. Guangya Exhibition, three companies have launched a $9 T8 lamp, there are people crazy, there are people desperate. In the near future, there will be cheaper to launch one after another, 7 yuan, $6, $5......

Prices plunged to Sri Lanka, also sparked concerns about the quality and safety of the industry. Many industry sources said that such a price, such as non technology has a breakthrough leap, then it is at the expense of the quality of the product in exchange for lower costs, want to price war forced shuffle, may not be able to do so.

However, some people think that in today's financing, financial markets can completely fill the gap on the product. The lamp Linsen 9 yuan for example, even if the loss of 5 yuan each, but a year to sell 1 billion, also on the loss of 5 billion, while the market sales of the first to get the title, the stock rose value may be 10 billion.

This evaluation, selection of the Limited by Share Ltd (hereinafter referred to as "Rawlinson Linsen"), Zhongshan city head lighting Electrical Appliance Factory (hereinafter referred to as "top lighting"), Foshan City Nanhai JOM Lighting Co., Ltd. (hereinafter referred to as "JOM"), Foshan Sunpro Energy Technology Co. Ltd. (hereinafter referred to as "Sunny Times"), Foshan electrical and lighting Limited by Share Ltd ("FSL") as a part of currently known as the introduction of 9 yuan of T8 lamp enterprises, and carried out violent dismantling invite the senior engineer of the company's products.

The following is the main part of the dismantling report.

The dismantling of Linsen lighting, including the head of JOM era, FSL, Guangpu (in alphabetical order) of the T8 lamp, which is light and Linsen top lighting 1.2 meters of integrated T8, JOM, Pu era is 1.2 meters T8 tube, FSL glass tube. Disassembly and disassembly to take the same kind of grasping the comparison method, then, dismantling it......

Table 1 sample information

Good 9 yuan T8 lamp...... From the Aladdin evaluation room on the part of enterprises and dealers interview feedback in the original 9 yuan, these enterprises, the so-called T8 lamp, more than just a publicity stunt, only some agents in mass purchasing conditions, in order to get the product price to 9 yuan, the price of these products in the actual market, far more than the price of 9 yuan.

Packaging comparison

Above: the head Linsen lighting;

The head is the integration of lighting and M.L.S. T8 lamp LED.

Outer packing mark:

And the head of lighting using Linsen color packaging, logo on the packaging of the product information in detail, including: brand name, product specifications (power, temperature, use environment etc.), product drawing, installation methods, safety tips and other products are marked by PICC; M.L.S. underwriting, not marked head lighting packaging on.

JOM and spectral era is the tube, mountain lighting glass tube.

Outer packing mark:

JOM, logo on the packaging the product information in detail, including: brand name, product specifications (power, temperature, use environment etc.), installation methods, safety tips and other times; spectrum without any logo on the packaging! The packaging of information JOM directly attached to the pearl cotton tube hollow tube end, marking clearly; FSL uses color packaging, identification information printed on the surface of the shell, a FSL product map on the box, not the other two!

Packaging methods and materials:

JOM is used in EPE hollow tube, the thickness of 5MM; the paper is the era of Pu + EPE hollow tube, hollow tube and pearl cotton goods used by FSL; 250g single tube corrugated paper, corrugated.

Packing three are relatively simple, but the protection degree, age > > FSL JOM guangpu. From the product said: FSL JOM > > Guangpu era.

Shell identification

As a basis for the identification of the product and its characteristics, characteristics and methods of use, the product identification may be expressed in words, numbers, symbols, patterns, and other instructions.

Product shell identification method:

M.L.S.: laser printer

Overhead lighting: self-adhesive paper

JOM: laser printer

Guangpu era: laser printer

FSL 7W: self-adhesive paper

FSL: 16W: laser printing

Identification content:

Visible differences on the logo:

There is a detailed description of the laser print product on the end cover, including the brand, model, power, working voltage range, Hertz, efficiency, color temperature and batch number;

The head of the light is pasted with a sticker on the back of the shell, indicating the brand, the name of the commodity, the power, the certificate and the manufacturer.

JOM logo laser printing on the head, the most comprehensive, including: brand, name, type, power, temperature, frequency, voltage range, Hertz, electric connection mode, manufacturers, the use of the environment and can be installed in the general combustible surface marking;

The era of Guangpu logo printed on the head, are relatively simple, including: brand, type, voltage, power, temperature, batch number;

FSL logo is printed on the plug, marking the contents of the package