A new opportunity for the development of surface treatment industry from LED electroplating

With the deterioration of the global environment, people of low carbon environmental protection consciousness constantly strengthen the LED product with its unique no flicker, no ultraviolet radiation, electromagnetic radiation, low thermal radiation characteristics have been gradually widely used in our life it also led the new leap of LED surface electroplating industry processing, especially in the area of LED stent into plating, many industry berserk meat dish". LED said some electroplating, do not understand the industry people will ask what is LED, what is the specific LED plating process, it can bring new profit for our industry, the next Xiaobian slowly answer for you.

What is LED?

LED (Light Emitting Diode), light emitting diode, is a solid state semiconductor devices, which can be directly converted into electricity to light. LED's heart is a semiconductor chip, one end of the wafer attached to the Mitutoyo LED on a bracket, one end is negative, the other end connected to the power supply of the anode, so that the entire chip is encapsulated epoxy resin. The semiconductor chip is composed of two parts, one part is the P type [1] semiconductor, in which the hole is dominant, and the other end is N type semiconductor. But when these two semiconductors are connected, they form a "P-N junction". When the current through the wire to the chip, the electron will be pushed to the P area, in the P area of the electron and hole compound, and then will be in the form of photon energy, which is the principle of LED luminescence. The wavelength of light determines the color of light, which is determined by the band gap of P-N junction material. 2.5 meters wide endurance board has been successfully installed by the successful commissioning! Greatly improve the lighting effect.

Light Emitting Diode light emitting diode

What is the name of LED stent plating?

LED stent, LED lamp in the package before the end of the base, based on the LED scaffold, the chip is fixed in welding electrodes, forming a package with silicon resin. LED support is generally made of copper, because the conductivity of copper is very good, it will lead to connect the internal electrode LED lamp, LED lamp package after forming, can be removed from the lamp bracket lamp, two brass feet became the lamp polarity, or for welding to the LED lamp. Other LED products. Because of the high technical content, LED plating has been more and more widely concerned by the industry.