Agilent automotive applications for the introduction of high brightness LED

Agilent Technologies Inc. (Agilent Technologies) and Lumileds Lighting recently announced the launch of three new Envisium medium power LED products --Envisium Power PLCC-4 (plastic leaded chip carrier package) surface (SMT) of LED, the products are mainly used in the central high brake lights, turn lights, car front lights, taillights combination the mirror turn and brake lights, signal lights and other automotive exterior lighting, and the instrument panel and the backlight control, central console backlight and navigation, lighting and sound system of the car. Envisium Power PLCC-4 SMT LED (630.0nm) into red, red orange and amber (617nm) (592nm) three, in line with the market on the current operating power is between Agilent PLCC-4 products and operating power 200mW for medium power Luxeon lighting LED light source 1W or higher Lumileds Lighting between the demand. These products can also be used in the field of home and commercial buildings and other aspects of lighting and lighting, garden lighting and lighting signs and signals. The Lumileds Lighting high performance transparent aluminum indium gallium phosphide substrate (TS AlInGaP) model PLCC-4 LED LED chip can produce higher luminous flux. Envisium Power PLCC-4 SMT LED PLCC-4 standard package size based on the LED with a substrate composed of a molded plastic reflector in the bent lead frame at the top; the chip package with the reflector cavity epoxy hybrid material Agilent's proprietary. This package design ensures that the LED maintains a high degree of stability in the temperature range of -40 DEG C to +100 DEG C, which is critical to the harsh work environment. Agilent's PLCC-4 SMT package can be driven with high current and compatible with IR reflow soldering and wave soldering. Agilent's new LED operating current is 50mA, the operating temperature range of -40 DEG C to +100 C. The minimum luminous intensity of red type is 630-1000mcd, orange red is 1000-1580mcd, amber is 630-1000mcd, and the typical value of the total lumen is 2600, 4300 and 3000.00mlm, respectively. To facilitate easy assembly, these LED are packaged in tape and reel with EIA standard. Each reel has a single strength and color (except red), achieving a tight consistency.