Analysis on the characteristics of LED bulb lamp

1, convenience

Can directly replace the existing energy-saving lamps, E14, GU10 and E27 as B22 interface and common lighting products, without any change, does not need any technical or professional personnel, we read the instructions, DIY can be easily achieved from general lighting to replace LED lighting.

2, security

Ordinary energy-saving lamp when the temperature will be around 60-80 degrees Celsius, ordinary incandescent lamp temperature is higher (80-120 degrees C), a little careless encounter will burn. Ball bubble lamp is used as a light source LED, with a professional heat dissipation structure, working temperature is very low (40-60 degrees C), even if caught in the hands will not burn. Energy saving lamps and ordinary light bulb products are used in glass materials, and hard objects collision is easy to break, causing permanent damage and can not be used, and will be accidentally cut glass. The bulb is the use of professional design shell, shell materials using PC / acrylic material casting molding, part of the LED light source is used for seismic resistant special materials fall (lens part used is forming a soft lens is the most advanced technology), and its chimney is Yakeli materials, even if broken it is not easy to cause.

3, energy saving

Ordinary bulb power ranging from 20W-100W, while the energy-saving lamp power 5W-65W. The bulb uses LED as the light source, the power only needs 0.8W-12W to replace the 15W-100W ordinary bulb and the 5W-50W energy saving lamp. It can be seen that the power ratio of LED bulb and ordinary bulb and energy saving lamp can reach 1:10. The use of energy-saving lamps and ordinary light bulbs work at very high temperature (80-120 degrees C), and energy-saving light spectrum contains IR (infrared), the content of ordinary light bulbs more extensive use of environmental temperature will be significantly increased, if it is in the summer increase refrigeration equipment work quantity and time, the final result is the increase in power consumption. The use of LED as a light bulb, but no IR spectra of LED light in (infrared) component, the whole structure and the heat dissipation structure design, normal working temperature is only 40-60 degrees, even though a lot of use, lower than ordinary light bulbs and energy-saving lamp produced by the temperature, if it is in the summer is significantly reduced the workload and time of refrigeration equipment, combined with the differences in the use of power (1:10), the result is relatively reduced power consumption and saving costs, ultimately reflecting energy-saving bulb of the.

4, environmental protection

Ordinary bulbs and energy-saving lamps, will produce a large number of IR (infrared) and UV (UV) radiation. And the bulb filled with inert gas, the production process and the use of abandoned mercury and other harmful gases and substances pollution, grinding damage to the environment will also have a certain impact. The bulb uses the LED as the light source, and LED does not work with IR (infrared) and UV (UV) radiation. Moreover, the LED light source used in this product does not have any filling gas, and does not have the damage of pulverization, and can not cause adverse effects on the environment. Thus reflects its environmental side.

5, health

Ordinary light bulbs and energy-saving lamps due to the work of the spectrum contains IR (infrared) and UV (UV) radiation, in some applications will have a certain degree of health effects, such as:

5.1, IR radiation will shorten the food (especially meat, sushi, etc.) of the preservation time, thus affecting its nutritional value.

5.2, UV radiation, long-term exposure to the light source containing the composition of its exposure, the object will be irradiated by the color of white, like clothes, pearls, watches the surface, crafts, paintings, etc..

Because of the spectrum of the bulb when there is no IR (infrared) and UV (UV) radiation, the use of good health is not bad.

6, short response time

In general, the energy saving light will change because of the change of the ambient temperature, the normal working temperature is between 20 and 40 degrees, and it will take 5~6 minutes to reach stable brightness in winter. All the tubes in a cold environment than the warm environment difficult work, and the light is dark, or with flickering, only with the increase of temperature will gradually be normal brightness temperature between -35 DEG -80 DEG, so do not consider the temperature of the working environment.

7, long life

Ordinary bulbs and energy-saving lamp life of 1000 hours and 8000 hours (hours a day to work); bulb LED light source life of 50000 hours (calculated every day for 24 hours).