DELO again to expand the industrial LED lamp's (light emitting diode) series, launched two models have stronger brightness and high performance products - DELOLUX 20 and DELOLUX 50. DELOLUX 20 uniform irradiation bonding surface, make the product connection within seconds of the thin adhesive layer rapidly solidified; the new feature of DELOLUX 50 is the main focus of the. Compared with traditional discharge lamps, the main advantages of LED lamps include: longer life and stable light intensity. They are mainly used in industrial production, can quickly and effectively curing light sensitive adhesive.
DELOLUX 20 local light (area lamp) can make the junction of the adhesive layer and fast curing, stable production process. The optimized spectral wavelengths range from 400 to 460 nm, which is suitable for DELO to be used for curing and UV curing of the bonding layer, which makes it possible to measure the curing time in seconds. In addition, the compact design makes the DELOLUX 20 can be easily embedded into a variety of production line. "The area of the light source is almost equal to the size of the lamp holder, and therefore, it is possible to uniformly irradiate any size of the adhesive layer by arranging several DELOLUX 20 devices. "Singapore chief representative DELO industrial adhesives company Marcus Hauer explained. In addition, DELOLUX 20 low energy consumption and low maintenance costs reduce operating expenses.
Because only an external control unit (such as DELO-UNIPRO) can independently control up to four DELOLUX 20 tube, therefore, radiation brightness and time can be based on different production processes and individual configuration. This new type of local lighting is especially suitable for automatic production line, glass bonding, display bonding, uniform and low tension of a large area of application, as well as thick and layered adhesive layer. Very uniform surface, ultra-low thermal radiation, start and stop can be controlled within milliseconds and other features, but also to DELOLUX 20 DELO-KATIOBOND assembly and other large areas of the best support for the application of pre activation.
High performance DELOLUX 50 light source, can be more accurate and fast curing adhesive surface; each substrate device can match up to four DELOLUX 50 lamp tube.
Flexible irradiation "the lamp for UV curing adhesive layer surface area of tiny and multiple bonding. "Marcus Hauer stresses. Since the LED lamp cap is very small, it can be easily configured to the production line. New lamp can launch up to 12000 mW/cm3 intensive light source.
Traditional mercury lamp in an instant start or not extinguished, and their service life of the bulb is only limited to about 1000 hours. No matter whether the immediate curing adhesives, which have greatly increased the additional costs of operation and maintenance. On the contrary, LED lights only when you need to start the actual use period is more than 20000 hours; with a narrow emission spectrum of customization, the glue can be effectively cured, and permanently curing effect.
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China