Application of LED in outdoor lighting engineering has been very popular, but in the application of indoor lighting engineering is at the initial stage, this is because the factors of lumen cost is too high, on the other hand also because the LED indoor lighting products too, lighting designers have no choice but to extend from, indoor lighting products the obstacle. Personally believe that the development and promotion of LED indoor lighting products should focus on the following five aspects:
1, product serialization
The traditional lamp is used in indoor lighting is a multitude of names, down lamp, grille lamp, chandeliers and lanterns composed of commercial lighting and Home Furnishing lighting in two major areas, leading the indoor lighting direction, and the current application in indoor lighting products is the main LED LED LED cup lamp, floor tiles and other decorative lighting and other applications the common traditional lamp LED light source is rare, but the huge potential of this market is no doubt, with the decrease of LED and enhance the optical efficiency of the price, who is the first to develop a series of products, who will seize market opportunities.
2, product integration, intelligent
One of the biggest advantages of LED is that it is easy to control. And cluster control, in some occasions need programmability, LED intelligent products can provide a series of solutions, intelligent LED products containing three color LED and a microprocessor, configure the DMX512 communication protocol can run on Ethernet, the intelligent management of indoor lighting to provide a convenient, you can also dilute due to the use of LED lead to the first high cost disadvantage.
3, product humanization
Lighting, after a series of evolution, is slowly becoming a fashion, lighting products humanization has become the first choice for people, while LED has the advantages of small volume, unlike the traditional light source and the light bulb, easy to control, in the humanized design of the lamp appearance to the LED lamp manufacturers unlimited space to play.
4, improve the utilization rate of luminous flux, to minimize the overall lighting costs
Although the LED light source as some traditional light source, high light efficiency, but due to the LED light source direction is strong, high availability, so long as the optical processing is reasonable, the flux maximum utilization, in the illumination, LED can achieve the function of lighting requirements.
Test 3WLED and 35W halogen lamp at the same conditions of illumination. Within 3 meters of the center of the LED light source illumination halogen lamp is much higher than that in the practical application, the lamp of common lighting in the range of 1-3 meters from the map can be easily seen that 3WLED lamp lighting effect significantly better than 35W halogen lamp, this is mainly because no halogen lamp luminous flux to good use.
5, to solve the cooling technology of high power LED, the maximum delay of high power LED light
High power LED is the future direction of the development of LED industry, due to its high light efficiency and superior lumen maintenance rate and become the major manufacturers to develop products, but higher requirements for high power LED cooling technology, the ambient temperature reaches a certain limit will soon decay, leads to the decrease of the life of LED at present, only 1W and 3W high power LED small application in the market, while the power LED 5W and 10W is still in the laboratory phase. Only solve the cooling technology of high power LED, the maximum delay of LED degradation and application of high power LED to a large area of.
At this stage, LED is already available in many places to replace the traditional light source, especially the emergence of high power LED, the acceleration of LED to replace the traditional lighting speed, but also makes LED become reality in a large area of indoor lighting applications, as the industry continues to mature, longitudinal in-depth development of LED products, high power LED in price and there will be a change in light efficiency greatly, and vigorously guide national policy, actively promote public opinion, we have reason to believe that the next ten years, LED will be like a fluorescent lamp now, flying into the homes of ordinary people.
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China