Development of intelligent lighting system

The control of traditional lighting system switch directly in load loop, when the load is large, the control capacity should be increased when the load switch, and leave off far, to increase the cross-sectional area of the cable, so that only the traditional lighting system to achieve a simple switch control function. The load loop of the intelligent control system controls the output joint of the output unit, so the capacity of the output unit should be considered only when the load capacity increases. The traditional lighting system can not realize the complex processing of the switch, and the intelligent lighting system.

At present, China's construction industry serious energy consumption, and energy resources in China is very short, so energy saving is very important, but the building energy saving is priority among priorities, intelligent lighting energy saving in the construction of electrical, can play a good role in energy saving.

The intelligent lighting system is more practical than the traditional lighting system

Compared with traditional lighting, intelligent lighting has obvious advantages in energy saving:

1 in the single control circuit system.

The control of traditional lighting system switch directly in load loop, when the load is large, the control capacity should be increased when the load switch, and leave off far, to increase the cross-sectional area of the cable, so that only the traditional lighting system to achieve a simple switch control function. The load loop of the intelligent control system controls the output joint of the output unit, so the capacity of the output unit should be considered only when the load capacity increases.

Not traditional lighting systems to achieve complex treatment on the switch, the intelligent lighting system can realize the control of the switch and the switch, if far, can be extended to control line length, which can save the consumption of the cable, saving investment, also can set the dimming timing to switch to control the the use of electricity load. If the distance is close, the switch can be implemented in a variety of ways to achieve a more complex operation, but also through the relevant software settings to the lighting system for multi-function operation.

2 in the double control circuit system.

The intelligent lighting system is more practical than the traditional lighting system. The characteristics of the traditional double control circuit in the lighting system is to control the system with two dual control switch, lighting switch cable connection between the multiple point control system is connected with the switch between the lines is more and more, the installation work line is becoming complex and difficult construction. In the intelligent system, the realization of the double control circuit only needs to be connected in parallel on the main control circuit. lighting design

Intelligent lighting system is more energy saving than traditional lighting system, a line can also carry out some work operation, and can realize the switch in a plurality of lighting control is very convenient when not in use, to avoid the waste of electricity.

3 intelligent lighting system on the control mode is better than traditional lighting systems, traditional lighting systems is to achieve control of lighting by hand movements, and the use of intelligent lighting system is a simple solution to this problem, the intelligent lighting system with low voltage, strong ability to control the way, and a wide range of control the lighting system is simple, can realize the control of the lighting of the scene and the preset memory function, also can be in operation when clicking a control switch on the panel can open a light, so the use of lighting system is more simple.

The traditional lighting system is only open and close to the lighting system, and the intelligent lighting system uses the light of light to produce different lighting effects under different scenes, creating a different atmosphere. But in the management way, to control the lighting system lighting system is the traditional artificial management, the intelligent lighting system is proposed in the country to realize the background of energy saving and emission reduction, so the intelligent lighting system management is through the network management to achieve, are linked through the computer and can achieve the management of the building. Can also be carried out according to the actual needs of the lighting, such as when the weather can be used in light of the actual conditions of the intelligent lighting system will be lit.