Emerson launched LDS100 series LED power supply

Emerson network power (Emerson Network Power) launched a series of LED lighting system is suitable for high efficiency power supply. The new LED lighting product model LDS100 includes 25W, 70W and 100W three different output power available to OEM manufacturers and installation contractor according to the actual requirements of different applications, select the application of power supply.

LDS100 series 100W LED power supply includes a variety of product models, of which the H model is suitable for the AC input voltage of the 120V-277V, while the U model is suitable for the AC input voltage of the 100V-240V. Pre launch of the model can output 24V DC current and DC voltage of 4.1A, comply with the provisions of Class 2 output, but also the constant current output with constant voltage output of two modes to choose from, to allow customers to use a different LED products can meet the requirements of a lighting system, which helps to reduce the manufacturer customer the inventory level.

The working range of the constant pressure mode covers the condition of no load to full load. To LDS100-24-H03 this model, for example, this product can be set with the current limiting function, the limit value can be set in accordance with the provisions of IEC 60929 interface to set. In other words, as long as the use of 0 to 10V standard signal to control the output current, control brightness. In addition, it is possible to set the current limit value through the adjustable resistor, which is convenient for the system design engineer to preset the numerical value.

All models of the LDS100 series power supply have a rating of not less than 0.9 of the active power factor correction function, so in addition to comply with EPA regulations "energy star, also with IEC 61000-3-2 C (Class C) Regulations for harmonic control. This series of power conversion efficiency is very high, for example, in the rated AC input voltage of 230V, the efficiency can be as high as 90% (typical). Such a high efficiency can further reduce the user's electricity expenditure. If the rated power, the power supply cabinet temperature down to -40 DEG C or even up to 90 DEG C, does not need the help of cooling fan, ensure that the power supply itself can still work normally in the temperature range of this room.

In addition, this case also conforms to the series of power up to IP67 grade waterproof version, in other words, intrusive diving will not cause damage to the power supply, so the most suitable for outdoor equipment and installed in the indoor environment of the instrument but work. This series of power small and slim, the size of only 8.5 x 1.65? (215 x 42mm), a thickness of 1.2? (30mm), so it can be easily installed within the space for a new generation of LED lighting systems limited.

LDS100 series power Emerson network power in addition to comply with CISPR 15 standards related to electromagnetic interference, but also comply with the Federal Communications Commission (FCC) fifteenth (Part 15) provisions relating to the transmission noise, to ensure that the power system does not appear short circuit, overvoltage and overheating. In addition, the LDS100 series power supply has been successfully tested to demonstrate its ability to withstand surge interference in accordance with the provisions of the IEC 61000-4-5 standard third class (Class 3) (U model) and class (Class) (H model) installation specifications.

LDS100 series power supply meets the stringent requirements of a number of product safety standards, including EN 61347-2-13 and UL 8750 and other relevant provisions of the LED lighting system safety. In addition, this series of products are also in accordance with the provisions of the relevant guidelines CSA No. 107.1 and CE LVD C22.2.

LDS100 design platform has a high degree of flexibility, allowing customers to quickly follow the individual application of the corresponding design modifications. LDS100 has begun mass production.