LED ceramic tile, LED display lamp faucet

A new solar powered LED tiles

Light Projects group released a new series of LED ceramic solar powered, with excellent appearance and unusual performance.

To SUA (Sutton Venn Association) the original idea as the foundation, Tsola is an embedded LED unit. It uses natural light to generate lighting without energy, both horizontal and vertical. At present, there are 198 x 99mm and 198 x sizes available, there are red, green, blue, amber, orange and white, these 6 kinds of standard LED color 198mm.

Tsola in bright and dark weather conditions can be charged, waterproof IP68, operating temperature at -40 DEG to +70 DEG, has the ability to resist the concentrated load and impact load, and it is suitable for the places most strict requirements. Because it does not require power supply or maintenance, the use of Tsola to carry out the renovation is the ideal choice in the existing areas where new wires can not be accepted or impractical. Moreover, it does not require professional electricians can be installed. Tsola uses a pseudo capacitor instead of a battery to maximize the efficiency and service life of the product, but also to charge in any climate. Products to 150 lux automatically cut off on / off level and high performance LED features.

Two, humanization kitchen supplies LED display lamp leading

Red, hot water (source: Bear online)

Purple light, water temperature just right (source: Bear online)

Blue light, cold water (source: Bear online) although simple, but it can be different temperature sensitivity with the LED display. When the water temperature is high, LED will show a red, on the contrary, when the water temperature is low is blue, of course, that just these two points is not enough, more humane place is, when the water temperature is appropriate will react, LED is purple! LED display lights currently only British goods, and the price of between 400 to 500 pounds

Link:

LED is a special kind of diode, when the electric connection will emit light, is usually used in electronic devices to display indicator circuit is closed or open, transparent epoxy semiconductor wafer LED epoxy around the two lines under the seal out or "bulb" shows how LED and connected to the circuit, negative LED wire is displayed in two ways, one is from the bulb plane, the second is that line two lines were short, the negative wire should be connected to the battery negative terminal LED operating voltage is relatively low, only about 1 to 4 volts, the current drawn by it is only about 10 to 40 ma. The most important part of the light emitting diode semiconductor wafer is in the bulb central, there are two wafers separated by an interface region, the P region is controlled by the positive charge, while the N region is controlled by the negative charge, the interface acts as a P and N electron flow. When the current of the semiconductor wafer is sufficient, the current flows through the interface to the P region when the current is switched on.