Mao Da day before the launch of buck converter LED driver APW7086. APW7086 is a built in P channel 100m 2 amp buck converter LED driver IC, this converter uses the current control mode, wide input range from 4.5~26V, and the output range from 0.2V to 90%VIN.
The current APW7086 using an external resistor to adjust the LED brightness, and can by EN pin to control the LED, suitable for driving high power 3~5W MR16 LEDs APW7086 PSM/PWM with the mode of operation, no matter what the load converter operating under both high efficiency. At the same time, the APW7086 also incorporates the activation reset (POR), soft activation, over current and over temperature protection. In addition, in the standby mode, the quiescent operating current can be less than 5mA, providing SOP-8 lead-free package, and the operating temperature can be from -40 degrees to 85 degrees.
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China