English: 中文版 ∷  英文版

Product News

Maxmim launches serial interface LED driver

MAX6980 serial interface LED driver provides 8 open drain, constant current absorption, rated 36V LED driver output. The device operates from 3V to 5.5V power supply. MAX6980 power supply and LED power supply can be in any order. Constant current output is set by an external resistor, the maximum 55mA. MAX6980 uses a 25Mbps, industry standard 4 wire serial interface. MAX6980 contains LED open circuit automatic detection circuit. Fault status in the LE high fashion into the serial shift register, the next data move, removed from the DOUT. MAX6980 failure protection function for security applications, if the serial port fails, it will turn off the output. If the serial interface stops working for more than 1s of time, all drive output latches are automatically cleared and all the LED connections on the output are turned off. Shift register data not affected. The output remains off until the output data is updated to open the drive output latch.

Therefore, if only temporarily interrupt transmission, can automatically recover the display. The use of MAX6980 watchdog function without any modification to the software. MAX6980 uses the industry standard shift register latch to control the serial port. Data is shifted into the 8 bit shift register of the driver by data input DIN and clock input CLK. After 8 clock cycles, the input data appears on the output DOUT, this mode can achieve multiple MAX6970 cascade. The latch enable input LE puts the 8 bit data of the shift register into the 8 bit output latch to determine the LED switch. The output enable /OE controls all 8 output switches whose fast characteristics can be used as the PWM input for the LED brightness control. MAX6980 series shift register latch control LED driver with a total of 10 models. The series includes 8 ports and 16 ports of two types, with rated 5.5V or 36V LED output, some models with LED open circuit detection and watchdog function. All models are from 3V to 5.5V power supply, operating at -40 degrees C to +125 degrees C temperature range.

Scan the qr codeclose
the qr code