Mexico Ministry of energy issued mandatory LED technical regulations directed at LED industry norms

This standard requires that the total luminous flux (Luminousflux) of the directional and integrated LED bulb shall not be less than 90% of the standard value of the product mark. The service life is not less than 15 thousand hours of light bulb sustained load flux is the lowest of 83.2%, and the service life is greater than or equal to 50 thousand hours of light bulb sustained load luminous flux is 95.8%. In addition, LED bulbs must be consistent with 2700 to 6500 of the relevant color temperature value, should also be.

Recently, the Mexico Department of energy issued a mandatory technical regulations on the use of NOM-030-ENER-2012, the general lighting light emitting diode (LED) lighting a new minimum energy efficiency standards, testing procedures, sampling, conformity assessment and labeling requirements.

The standard minimum lighting intensity must comply with the requirements of A, 50lm/W to 55lm/W will be BT, P, PS and T type integrated full LED lighting and did not declare the LED bulb shape (minimum illumination intensity of energy department initially proposed for 50lm/W to 60lm/W); BA, C, minimum illumination intensity of CA, F and G type the full range of integrated LED lighting must be in accordance with 40lm/W; AR11, BR, ER, for MR, PAR and R type directional LED bulb, if the bulb diameter of not more than 6.35 cm, the minimum illumination intensity must comply with the 40lm/W, the minimum lighting lighting intensity more than 6.35 cm in diameter is 45lm/W.

This standard requires that the total luminous flux (Luminousflux) of the directional and integrated LED bulb shall not be less than 90% of the standard value of the product mark.

The service life is not less than 15 thousand hours of continuous lighting load flux for a minimum of 83.2%, and the service life is greater than or equal to 50 thousand hours of continuous lighting load flux for 95 8%.

In addition, LED bulbs must be consistent with 2700 to 6500 of the relevant color temperature values, should also meet many other requirements and test procedures, including temperature tolerance test and open and close test.

In addition, the standard requires the LED bulb to indicate the product name, brand, vendor information or certain electronic information (such as conventional input voltage, power frequency, power and current), as well as the date or the date of manufacture of the code.

The packaging shall include information such as the name of the country of origin, the name and address of the manufacturer or importer of the country, certain electronic specifications, the type of bulb and the spatial distribution of the light source.

Mexico Ministry of energy issued a mandatory technical regulations for Mexico's LED lighting market has given the specification. China's LED lighting standard is still in a blank state, but also makes China's LED market disorder, industry rely on price war to compete for the market, but also produced a lot of problems.

The current our country may refer to LED lighting standards and the United States and Mexico and other countries, according to the current situation of our country to develop industry standards, promote the development of China's LED industry and lighting market.