Millet Meizu intelligent light bulb trial experience: poor evaluation?

Because you feel the pleasure of turning off the lights in bed in the winter (if you are in the southern city of the city that estimates this pleasure will come more strongly), start to pay attention to all kinds of smart lights. But as the time goes on, the scene is much more, and after a few smart lights, it is found that there are still some gaps in their intelligence.

In the bongII Bracelet I mentioned the yeelight smart lamp, because it could use bongII to control the switch, so I used a long time and also had been wearing bongII. After entering the house, you can turn the light on the yes key on the hand ring, then lay on the bed and brush the cell phone again to turn off the light. This scene is still very convenient. But I have a special case: because with my parents, sometimes the parents will go into my house, although the lights are not lit, but the switch on the wall is in the open state, and it will be closed to me.

Once this happens, it's troublesome, as long as I just turn on the power, but yeelight will return to the start design and turn into a "warm" yellow light when the power is reopened. It's certainly no problem if you keep this light for years, but if you like the bright white light in the house, you need to turn on the cell phone and adjust the color temperature of the light. And when I used it, there was a bug: once the power was turned on, app would lose the connection to the lamp, I had to delete the established connection, and then re search the bulb, add, and adjust the color temperature. However, after the app reinstallation and connection were deleted, the bug seemed to disappear and could not be restored.

Finally, I changed my yeelight and took off the bongII.

X-Light+ is one of the first members of the Meizu smart home, because I gave iMagic to other friends, and the white light of the X-Light+ would be brighter than the yeelight (forgive me for no detailed comparison of the power and lumen of a few lights, and the LED lamp would have to save electricity more than the traditional energy saving lamp), though not It can be controlled with a handset, but the app control switch with a mobile phone is also barely bearable. But the same problem arises. First, if I don't turn off the switch on the wall, I need to take out my cell phone in the dark every night, unlock, open app, and then choose to turn on the light. Obviously this is much lower than the power efficiency, so I still choose to turn off the power and open it. But when I want to close it in the evening, I need to go into the app, the first connection, the reelection device, the point connection, and then back to the upper level menu and then turn off. Although it is good to be used, you can take a mobile phone to turn off the light and what bicycle, but it is difficult to feel that the design of the time is not very human.

The main function of X-Light+ is the illusion. In the main interface, you can click on different colors to make the lights different colors. In addition, app has a large number of ways to change colors, such as you can change by game, or change color through the rhythm of music, or change by shaking. The colourful lights are an attractive feature when the smart lights just come up, and when they are installed, users usually play with freshness, but they don't know how many people often make the house colorful after they have been fresh. My home is not a night shop, and do not make party every day, I need only a bright white light and a warm light for reading. Of course, if you use X-Light+ in a nightclub or a bar, it may be suitable, and you can also allow guests to go with their favorite colors, magic purple, warm red, and blue... Charm Blue and so on.

But X-Light+ is really not so convenient, so I simply use it as a traditional light bulb.

Phantom was a very early manufacturer of smart lights, because it focused on the lights, so the product was iterated and the relevant accessories were introduced. And the idea that their "smart lights shouldn't rely on app" has made me a great interest. Although it is a bit more complex than other smart lights, it seems to me the best smart light scheme at the moment.

First, if you have a phantom Nova 2 Smart lamp, then you just have a LED bulb with a price of 129, you can't use a mobile phone to control him, or adjust it, and you can't interact with other devices, and you will need a Teleport gateway with a price of 149. It's a lot more expensive than the other lights, so get ready first. If you want to make such a system, you'll have to get a bit of blood.

The Teleport gateway is the core of the phantom system. You need to connect it to the power and connect the router to the router and wait for the light to turn blue. In addition to scanning the two-dimensional code with app, it doesn't need any setting, and then you can add the device in the same way of scavenging. If there is only one light, then use app to control the light and light and shade and color temperature adjustment. (phantom does not provide a variety of options, the reason is that there is no user needs). App provides a variety of scene options, users can freely define different color temperature and brightness collocation, and then set the scene in a shortcut on the phone screen, although the light is still open to open the cell phone click app, but it is more convenient than opening the app to turn on the light (and possibly reconnect the device).

And the more special thing about phantom was that he provided multiple peripherals, and I got a random switch and a door magnet. A random switch is like a wireless switch. You can put it in any position and use it to turn off the light. You can throw it at the head of the bed. When you go home, use the switch on the wall to turn on the light, and then switch off the light with a random switch before you go to bed. However, a random switch can only trigger a scene, such as opening three lights at the same time, or controlling only one, and not a switch to control all the devices. This function is said to be realized with the phantom PIXEL, but this time there is no chance to experience it. In addition, a variety of timing switch lights can be set by app, even when it reaches a certain area or leaves a region, triggers the scene.

If you don't think it's convenient, then the hallucinant gate magnetism can produce another way. The gate is also connected to the gateway, then glued to the door and glued to the door frame. Then the trigger is triggered by the induction of opening the door. In conjunction with the light, you can automatically turn off all the lights when the door opens in the morning, and open the light when the door opens at night, and the gateway will automatically identify it according to the current system time.

Then there's the scene: go home at night and open the door, the light automatically opens; then sit down to watch the meeting, activate the scene with a mobile phone shortcut, and press a random switch before lying on the bed with a random switch (actually you need to press two, because there are some logical questions) to turn off the light; and then in the morning When you come out of the house, you don't need to care too much about the lights. Although some special scenes will have problems, such as a door in the evening and the lighting automatically open, you can only turn off the power manually, but the power is not reconnected, and the intelligence is much more than other alternatives.

The three kinds of smart lights are more intelligent than they are - although the cost is much higher and it doesn't reach the intelligence we understand, at least it's much more convenient than the switch on the wall.

For more information on LED, click on the Chinese LED network or pay attention to the WeChat public account (cnledw2013).