The 7 new generation of lighting concepts came out: This is the future lighting

In the "Lighting Fair 2015" (March 3, 2015 - 6 in Tokyo, the Exhibition Center for International Convention and Exhibition Center), the organizers of the exhibition "Coreca Light", a number of exhibitors in Japan have released the concept of future lighting. A few specific proposals are presented below.

An organic EL panel has three functions

NEC lighting is on display "the idea of organic EL architectural lighting 'sora_terasu'". This idea is based on the idea of developing a large area transparent organic EL lighting panel equipped with high efficient solar power generation in the future, which is used as a skylight for residential buildings. In the daytime, the organic EL lighting panel is used for solar power generation and used as a transparent skylight. At night, the power generated by daytime power generation will be used to illuminate the room.

In the exhibitor case, NEC lighting shows a house model that uses the semitransparent organic EL lighting panel as a skylight during the day and uses it at night to provide lighting.

Mt Fuji lighting plan

Iwasaki electric battles "the Mt Fuji lights!" On the subject, a demonstration of the Mt Fuji stereoscopic model was carried out. In addition, Yazaki electric also verified what lighting lights are needed to illuminate the entire Mt Fuji.

The verification shows that in order to illuminate Mt Fuji effectively at present, it is necessary to set up 10 thousand and 250 lights of 35 thousand LM and 380W of the power produced by the electrical production of Yazaki in three places near the half of the Mt Fuji mountainside. The cost is 3 billion 500 million yen and the electricity fee is 100 thousand yen per hour.

However, it is reported that in 2035, 20 years later, 1 devices will have a 1 million 200 thousand LM luminous flux and a luminous efficiency of up to 250lm/W. Only 448 devices are needed at this time.

RGB trichrome with lighting?

Toshiba lighting technology shows the idea of "fun lighting for life", which can be illuminated through the R, B, and blue (G) 3 light spotlights.

Integrated camera, microphone, loudspeaker, sensor, and thermometer function for illuminator

IRIS uyyama displays the new idea of a camera, microphone, loudspeaker, human sensor, illuminance sensor, and temperature sensor lighting and light bulbs. The camera can identify people's faces, expressions and movements, and provide monitoring and home functions. The temperature sensor automatically transfers the measured temperature data to the air conditioning system. The user can open or close the lighting and adjust the light in voice through a microphone.

There will be no lighting utensils in the future world

The lighting appliance manufacturer's Koizumi lighting is described as "the building is the lighting fixtures." For the theme, the concept of illuminator does not exist in the future life. In the future world, lighting will be integrated with architecture, and ceiling and wall can be used directly as lighting or display. Of course, it will be equipped with full color dimming and coloring function.

Through the application of the above concept model, Koizumi lighting realized the luminous ceiling and wall using LED and light guide plate.

Light bulbs emit Aurora

The idea of MITSUBISHI motor lighting is "shiny". It is specifically a light bulb that glowing like a aurora.

ROM exhibits new lighting devices that make the sensor "invisible"

The existing human sensor sensors are used to detect the heat generated by the human body, so it is necessary to expose the sensor to the outside of the device. The new lighting appliance, which ROM exhibited, uses a sensor that can be built in the illuminator, which uses a wave of 2.4GHz frequency band to detect the presence of the body according to the reflected wave. Even in the glass cover of the illuminator, the sensor can work properly. The new product uses the Doppler frequency shift (Doppler Shift) to detect the frequency fluctuation of the reflected wave, so as long as it is not covered by the objects, such as metal and so on, the human body can be grasps with high precision.

The new product will be used for utensils that wish to present a simple design to the user and do not want the user to notice the use of the sensor. Rom believes that this product can reduce the misoperation of sunlight, humidity, dust and wind and other conditions, so it is expected to use this feature to develop new uses. The size of the sensor is about 2cm.

For more information on LED, click on the Chinese LED network or pay attention to the WeChat public account (cnledw2013).