As we all know, the first generation of plastic industry waterproof connector in use often appear some problems, for example, first, waterproof unreliable. Because the male and female on the plug after generally adopt the traditional locking nut joint design, construction personnel installed in the outdoor scene, using manual screwing connected with male and female plugs, tighten the screw more vigorously, how many laps not precisely specified value, which is difficult to define whether fully tightened, with construction supervision personnel is not easy to use a simple method by acceptance, unless each check again. A lot of outdoor engineering quality accidents are not tightened because of sealing, waterproof problems caused by the system can not run normally. For example, LED landscape lighting projects, often to the rainy day landscape fonts and contours of the lack of arms appear awkward legs, the main connector is not waterproof caused. Second, connect the cable with plug tail locking is not reliable, often have the possibility of leakage, because the tail of the first generation of "backloadsd" waterproof connector lock nut universal default lock manually instead of locking tools, one hand caused by the operator of physical consumption is too large, and can not accurately define the lock tightening torque, no water leakage caused by. Third, size design is generally too large, in some of the space required or hidden needs of the project design, often because of the larger connector body exposed, decrease the aesthetic effect of the whole project. Fourth, the contact impedance of the PIN pin is too high after the plug is connected. Because the first generation of products made of metal stamping, male and female male parent PIN connection needle and wall contact are often not tight and close grained, resulting in resistance, joint fever, if under high temperature in summer, easy to cause a fire hazard and engineering equipment itself.
Suzhou quick (Quick-Contact) second generation plastic industry waterproof connector is in DFMEA (DFMEA) analysis, infrared heat image analysis, wind tunnel simulation experiment on the basis of the design completed, the products have many advantages, first, in male and female plugs to relieve water design, using a similar machine tools industry in general used to call the "design three jaw chuck", is the biggest advantage of this design, can accurately guide the male and female plugs for docking and precise fixed connection to waterproof, which has designed a small bump, which is very dark area in the light, the operator by listening to the sound and feel of all you can determine whether the installation in place. Second, fast "backloadsd" connecting cable and connector connector in the tail sealing industry classic use of the standard "six nut" to fix, on the one hand it increases the convenience of the cable and can accept wrench tool ordinary can completely replace the manual easy reach tightened, greatly reducing construction improve the strength of cable connection reliability. Third, a more compact size design flexibility, better concealment, being the "unsung hero". Fourth, the use of environmentally friendly plastic connector shell Recyclable engineering material, connecting the PIN needle machine adopts the machining and surface plating, the electrical connection is more stable and reliable, lower contact resistance, reduce system energy loss, is the real green connector.
The products are widely used, such as LED outdoor lighting, electric vehicles, solar power, street lighting, shipbuilding industry, etc..
The connector has been listed, the specific technical business information, interested friends can contact fast photoelectric (Quick-Contact) consulting, website www.quick-contact.com
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China