Tektronix Inc launched three new passive probe

Global oscilloscope market leader - Tektronix Inc announced the day before, the new TPP series passive voltage probe series of two new products: the new TPP0850 and TPP0502 probe, and launched a P5100A high voltage probe. The new TPP series probe has the industry's lowest probe load and is an ideal choice for engineers to develop energy efficient power and power semiconductor devices.

TPP series passive probe new release will apply to the newly launched Tektronix MSO/DPO5000 series and MSO/DPO4000B series oscilloscope, which provides the most comprehensive analysis of power industry. Tektronix will be held in March 16th in Munich, Shanghai Electronics Show - International LED technology innovation forum for LED lighting driver test program keynote speech, and for the first time on the latest oscilloscope and probe series.

"Designers are asked to improve the design efficiency of the pressure, which leads to the switching power supply can minimize power consumption and power semiconductor devices to" Tektronix midrange oscilloscope general manager Roy Siegel said, "we continue to provide innovative solutions for our new probe and oscilloscope, such as automatic power measurement tools to help our customers to overcome the new challenges, including improving the design efficiency and so on. "

Best for the industry's best oscilloscope probe products

New TPP0850 and TPP0502 probe new expansion of the characteristics of breakthrough TPP series of high bandwidth, universal probe architecture. TPP0850 provides the highest bandwidth (800 MHz) for the detection of high voltage signals (peak to peak voltage up to 2500V). This is ideal for testing power semiconductor devices and switching power supplies. In order to minimize the power loss, the switching speed of the switching power supply is increasing, which leads to the demand for faster rise time, higher bandwidth and higher voltage probe products. TPP0850 meets this requirement, and can be used for operating voltage of 1200 VRMS switching transistor circuit, which has exceeded the standard universal probe operating voltage range. It can also adapt to the need for faster rise time of new power applications.

TPP0502 for low voltage measurement (such as power output ripple measurement) provides the highest bandwidth (500 MHz) and the lowest attenuation coefficient (2X). The low capacitive load of the TPP0502 means that even with a long lead, the effect on the quality of the measurement is minimal, which allows the engineer to move the design flexibly without having to worry about the length of the lead.

TPP0502 and TPP0850 intelligent communication through the TekVPI interface and the MSO/DPO5000 and MSO/DPO4000B series oscilloscope. This means that the oscilloscope can automatically scale the size of the display screen, so that the attenuation coefficient of the probe to match, in order to show the correct results. In addition, the built-in automatic compensation function on the probe can automatically compensate the probe to the oscilloscope path, so as to provide the most accurate measurement when the probe is connected to the oscilloscope. In the past, when the probe was transferred to a different channel or oscilloscope on the oscilloscope, the engineer must manually compensate the probe, this process is very time-consuming.

Launched by the end of 2010 MSO/DPO5000 and MSO/DPO4000B Series Oscilloscopes provide the most comprehensive analysis of power industry, including the quality of the power supply, switching loss, magnetic loss measurement and analysis of output power. The DPOxPWR and DPOPWR software solutions also support automated probe inter channel delay correction to ensure measurement accuracy.

The latest upgrade of the P5100A high voltage probe

P5100A provides a higher bandwidth of 500MHz, and improved the noise and the measurement repeatability, safety and in accordance with the latest (Amendment 1 (2008) of EN / 61010-031:2002 revision of IEC Standard). Designed specifically for high frequency applications, the P5100A is a low input capacitance high voltage probe (2500V). The probe can be in the range of 7-30 pF with the oscilloscope interface to the nominal input capacitance compensation. A series of spiral interface accessories provide a convenient connection between the device and the device under test.

Please pay attention to the Tektronix Inc Twitter (@tektronix) and Facebook account.

About Tektronix Inc

60 years, engineers have to Tektronix for test, measurement and monitoring solutions to design challenges, improve production efficiency, shorten product time to market. Tektronix Inc is a leading provider of test equipment, providing support to engineers who are focused on electronic design, manufacturing and advanced technology development. Tektronix Inc is headquartered in Oregon, Oregon, to provide customers with highly acclaimed service and support. Access to cutting-edge technology, please visit www.tektronix.com.cn.