The SILVA L1 3W Luxeon LED headlights

Is a SILVA, we are not familiar with the brand. Like IKEA (IKEA) furniture, the same from Sweden's SILVA has a calm and meticulous Nordic style.

It is one of the world's most famous manufacturers of compass, and is also a leading head lamp manufacturer in europe.

SILVA L1 Luxeon LED headlights for 3W

This is one of the world's brightest single LED headlights, which uses a full set of 3WLuxeonLED, to achieve completely comparable with xenon halogen lamp brightness.

Luxeon is a high brightness LED brand of LumiledsLighting, which is jointly established by PHILPS and Agilent Technologies, leading the technology trend in the lighting industry.

Compared with the traditional LED, LuxeonLED improved thermal performance so that it can work in a more robust current, so 1W, 3W, such as high-power LED can be used on the headlights.

Specifically, the 3W LED can make the headlights with more than 100 meters of effective lighting distance, which is also quite good for many xenon halogen bulbs.

The 3WLED in such a brightness, you can easily achieve more than 40 hours of continuous lighting, which xenon halogen can not match.

With regard to the LED spotlight performance, penetration and color rendering capability, here we have to do some correct understanding:

1, LED is white light, white light is not as strong as yellow light penetration?

LED is white. In the absence of fog in the dark, it has more than Guanghao yellow penetration.

In the rain and fog, its penetration is not yellow light.

But here I would like to say, relative to the original low power LED of this problem, the high brightness of the 3WLED or it has been greatly improved.

2, LED light is scattered, can not focus

LED through the design of a good lamp bowl, can be focused, such as PETZLMYOXP and SILVAL1, which can be focused on a small area

3, LED can not faithfully reflect the color of the object

This is true, especially in the performance of three-dimensional and reflective objects on the performance of LED is the lack of advantages. Because the white LED may allow you to see the front of a group of things, but can not quickly distinguish what it is. For example, in the end is a rock or a pit, in the end is the land or water.

3WLED due to the increase in brightness, it can be said to have been able to let you see in the scope of these needs, as far as possible, it can not be compared to the xenon halogen.

We don't say much, look at the parameters of SILVAL1:

L1 uses a unique electronic control system allows the LED to continue the brightest light, until the battery is only 15% of the total battery capacity, it will automatically switch to save power mode, to ensure that no power accident.

The unique headlamp illumination angle structure provides the perfect balance in the up to 15 degrees down to a large angle range of 30 degrees for any adjustment.

L1 external battery box can be hung on the belt, the use of 4C battery (LR14), allowing the use of time to extend the 300%, while ensuring that the use of cold conditions in the battery to maintain the best performance by body temperature. Four lighting modes: power saving mode, bright mode, ultra bright mode, flash mode. The conversion between the four modes and the light switch is accomplished only by a key on the light contact lamp. Power supply: 4 AALR6 batteries (battery five, boxed, including) can be put on the extended battery box 4 LR14 batteries used in the cold case or provide additional lighting time far irradiation distance: 100 meters of lighting time: using the extended battery box, 4 LR14 battery power saving mode: 200 hours, bright mode 160 hours, 140 hours without the use of ultra bright mode extended battery box, 4 AALR6 battery power saving mode: 70 hours, 55 hours of bright mode, super bright mode 45 hours operating temperature: minus 40 degrees Celsius to 60 degrees above zero head material: PC/ABC waterproof standard: IPX6 (multi direction water repellent) weight: 226 g (including 4 AALR6 batteries, five batteries)