The article does not price war, one will be able to get LED lights

Modern owners pay attention to the overall effect of home decoration, lighting as home lighting products, while the room plays an indispensable role in the decoration. Colorful LED lights with the modern owners of the favorite, the owners can choose according to their own preferences with color, to create a different home effect. Many owners for the lamp is not very understanding, what is the cause of the lamp with fever? How to install the lamp belt? What are the lights in the maintenance need to pay attention to?

A, LED lamp belt specifications and characteristics

Conventional round three, round the three line, flat line, flat line, such as four;

Colors are red, green, blue, yellow, white, colorful, etc..

Diameter: 10mm---16mm.

Characteristic

1, soft, can be like a wire curl.

2, shear and extension.

3, the bulb and the circuit is completely covered in flexible plastic, insulation, waterproof performance, safe use.

4, strong weather resistance.

5, not easy rupture, long service life.

6, easy to make graphics and text modeling; at present it has been widely used in buildings, bridges, roads, gardens, courtyards, floor, ceiling, furniture, cars, ponds, water, advertising, signs, signs, lighting and decoration.

Two, LED lamp belt installation method

1, indoor installation:

LED lights for indoor decoration, because of not having to undergo the installation is very simple so exposed to wind and rain. Each LED lamp belt is affixed with self-adhesive 3M double-sided adhesive, the installation can be directly torn off the surface of the 3M double-sided adhesive stickers, and then fixed in the light of the need to install the place, by hand, like a flat. As for some places need a corner or long how to do? Very simple, LED lamp belt is 3 LED as a set of serial parallel circuit structure, each of the 3 LED that can be cut alone.

2, outdoor installation:

The outdoor installation will withstand wind and rain, if the use of fixed 3M glue, a long time will cause the decrease of the 3M adhesive LED lights off, so often used for outdoor installation fixed card slot, need to cut and connected place, method and indoor installation, just need another with waterproof glue. In order to consolidate the connection point of the waterproof effect.

3, power connection method:

LED lamp with a general voltage of DC 12V, so the need to use the switching power supply, the size of the power supply according to the power of the LED lamp and the length of the connection. If you do not want to take each LED lamp with a power to control, switching power supply can buy a relatively large power for the total power supply, then put all LED light with all input power in parallel (wire size is not enough, can also extend) unified by the total power switch. The advantage is that you can focus on the control, the place is not convenient to achieve a single LED lights with the lighting effect and switch control, which can be measured in a specific way.

4, the controller connection:

LED and RGB lights with marquee with the need to use the controller to achieve varying effect, while the control distance of each controller is not the same, in general, simple controller for 10 control distance to 15 meters, distance control remote controller is 15 to 20 meters, the longest can be controlled to a distance of 30 meters. If the LED lamp is connected with a long distance, and the controller can not control the length of the lamp belt, then need to use a power amplifier to tap.

5, pay attention to the distance between the LED lamp belt:

In general, the 3528 series of LED lamp belt, the longest distance of 20 meters, the series of LED lamp belt, the longest distance of 15 meters connected to the. If the distance beyond the connection, the LED lamp belt is easy to heat, the use of the process will affect the service life of the LED lamp belt. Therefore, the installation must be installed in accordance with the requirements of manufacturers, do not let the LED lamp with overload operation.

Three, LED lights with precautions

1, the brightness of the requirements for different occasions and different products on the LED brightness requirements are also different. For example, if you put some LED jewelry cabinet in a number of large shopping malls, we will have some attractive high brightness, but also the decorative effect is also divided into LED spotlights and LED lights with different products.

2, anti-static ability: antistatic ability of LED, long life, but the price will be higher. Usually anti-static better than 700V above.

3, wavelength and color temperature of the same LED, the color will be consistent, the combination of large quantities of lamps is particularly important. Do not have too much color difference within the same lamp.

4, the leakage current is LED reverse conduction current, we recommend using a small leakage current LED products.

5, waterproof ability, for outdoor and indoor LED lamp requirements are not the same.

6, LED lighting angle on the LED lamp has a great influence on the different lighting requirements, such as LED fluorescent lamp, we recommend the use of 140-170 degrees. We're not here to explain in detail.

7, ED chip LED core LED chip quality decision, many brands, there are foreign brands (such as CREE, etc., have Chinese Nichia) in Taiwan (such as Guangjia, Jingyuan etc.). Different brand prices are also very different.

8, LED chip size also determines the quality and brightness of LED, we choose the time to try to choose a larger chip, but the price is also different.

Four, led to the LED lamp with the heat of the 2