The current mainstream lighting market seven major programs

The typical application of LED lighting is: indoor lighting (used for commercial, industrial and residential environment), outdoor lighting (lighting, parking lot lighting) and architectural, decorative lighting, led initially, due to launch the entire spectrum of color and is used for decorative lighting. In some cases, LED has become an effective solution for building lighting. Compared with other lighting technologies, LED has better performance, so it has become the mainstream of the current general lighting market.

The basic structure of LED lamp is an electroluminescentsemiconductor materials, placed on a wire rack, then sealed with epoxy resin around, to protect the internal core function, so the seismic performance of LED is good.

LED is a fast developing technology, which is widely used in many kinds of general lighting. The typical application of LED lighting is: indoor lighting (used for commercial, industrial and residential environment), outdoor lighting (lighting, parking lot lighting) and architectural, decorative lighting, led initially, due to launch the entire spectrum of color and is used for decorative lighting. Under certain circumstances, LED has become the effective scheme of building lighting. Compared with other lighting technologies, LED has better performance, so it has become the mainstream of the current general lighting market:

The current mainstream lighting market seven major programs

1 compared with other lighting technologies, LED has longer service life. LED's working life of up to 50000 hours, while the incandescent lamp life of only 1000 to 2000 hours, small fluorescent lamp (CFL) service life of about 5000 to 10000 hours. The significant advantages of service life make the LED ideal for commercial and industrial applications that need to be replaced with larger labor costs to replace the lamp.

2 energy efficiency is better than incandescent and halogen lamps, equivalent to fluorescent lamps. In addition, the efficiency of LED is also increasing; the efficiency of white light LED (WLED) is expected to increase by about 50% in the next 3 to 4 years.

3 smaller outline size. LED lamp is the same size as the MR16 and GU10, and CFL can not meet this type of application.

4 you can use the appropriate drive to provide brightness adjustment. For the need to adjust the brightness of the application, fluorescent lamps are technically limited. Although the traditional LED design also encountered a similar problem, but Maxim provides LED driver innovative solutions compatible with the SCR dimming and rear dimming design.

5 has a strong luminous directionality. Unlike other lighting technologies, LED is well suited for applications requiring directional lighting, such as small angle reflector.

6 lower temperature with higher efficiency. The efficiency of fluorescent lamp will decrease at low temperature. In contrast, LED is very suitable for low temperature working conditions, such as: refrigerator lamp.

7 can easily change the luminous color. This advantage makes RGBLED the ideal choice for building and scene lighting, and can change the color of the light in real time according to the specific requirements. All in all, LED has many advantages that are not available for incandescent and fluorescent lamps. Based on these advantages, designers are constantly exploring more suitable for LED lighting applications, however, due to limited space, we do not elaborate here. This article will mainly discuss the LED lighting products, used to replace the same specification incandescent lamp, halogen lamp or fluorescent lamp. These LED lights must be able to be installed in existing specifications and compatible with existing infrastructure.