The light is more than three points (1)

How to control the water reflection curtain?

First installation of lamps and lanterns to ensure that no visual interference, to ensure the best viewing results. At the same time, it is clear that the reflection and transmission ratio of light depends on the incident angle of the light on the surface of the pool.

Basic principles of swimming pool design

The swimming pool is not accurate in workplaces, for swimmers, swimming pool lighting first to provide security for swimmers so the swimming pool lighting need to meet the following requirements: service personnel must clearly see the danger that swimmers, by reflecting light and water restrictions have a standard to achieve the level of illumination. In swimming, when the player touches the pool, the referee and the audience should be able to clearly see the action of the pool. For large events, the vertical illumination and uniformity must meet the requirements of color television broadcasting.

Lighting design skills

Light projector

In the upper part of the large swimming pool to be used in the deep lighting of the light projection, in order to further limit the glare and safety, the application of light on the light of the appropriate treatment of the protection of the shade and protection network. Because the backstroke of swimming is not easy to solve the problem of glare, therefore, in addition to the application of the hood, the lamp should be further restricted by the diffuse transmission material.

Diffuse illumination

Diffuse reflection illumination using ceiling reflection. The irradiation direction of the lamp to the ceiling, the ceiling should be indirect lighting the formation of diffuse material with high reflection coefficient such as matte surface treatment Aluminum Alloy, stainless steel panel, but the light effect is still not too high, and a large area of poor lighting, should be combined with other ways to use lighting.

Lighting ceiling or band lighting

If the pool is not included in the platform, the ceiling is not very high, can be used to light the ceiling lighting. Luminous ceiling can better solve the problem of glare, but low light efficiency, the need to increase the number of light sources, a large area of high cost, can also be used to replace the light emitting ceiling, layout and installation is relatively easy.