Lei Feng Wang Lidong in Shenzhen have a feeling of summer, but it is undeniable that winter is getting closer and closer to us, need to add clothes. That there is no way, let us wear a ball, but still keep full of force? Make a luminous LED lighting jacket seems good, not only can become the brightest stars in the night sky, but also warm.
For the transformation of the old coat of the best point (not distressed), thin point, a little more. Coat the best turn a face, so that the purse is hidden inside, because the back of the pocket to be installed in the battery. In order to avoid the light source is absorbed by the dark color of the coat, an aluminum reflective material can be used to sew into the coat.
In this tutorial, the LED lamp is made up of 27 lights, each of which has 20 LED bulbs. Each lamp string is run with 2 AA batteries, so the first thing is to put the battery holder in the pocket, and then use the tape to the holder and aluminum reflective material on the LED lamp uniform adhesion. If you want the coat looks better, must find a way to spread the LED light spot, such as using a sufficiently thin cotton pad, make the most of the light is transmitted to the outside, the light cotton pad thickness can also spread. Because the cotton is not easy to protect, but also with a transparent plastic sheet covering the entire jacket.
Making material
Jacket
Aluminum reflective material
LED lamp (11 x 20 water blue + + 16 x 20 water blue, white)
Battery 54 AA 1,5V
Adhesive tape
About 2 square meters of cotton
Plastic film about 2 square meters
Glue spray
clear lacquer
Old newspaper
Tool:
Sewing machine
needle
Paper cutting machine
scissors
Hot glue gun
Both hands
Step 1: Sew
The reflective surface can be made of absorbent cotton, since the rear LED lamps need to be fixed on the surface of the cotton. Some parts of cotton are not covered. In particular, the joint part of the clothes, it is easy to deformation and scratches, so these parts can not use cotton. Most of the cotton can be used sewing sewing machine, a small part of the sewing machine can not contact with a needle box.
Step two: fixed LED lights
With the aluminum wrapped jacket, you can start fixing the LED lamp. Put them on an average cloth jacket, can be fixed with adhesive tape. Tape to ensure that there is enough flexibility between aluminum products and light string, the most important thing is that tape is the most efficient adhesion method.
Step three: fixed absorbent cotton wool
The next step is to fix the absorbent cotton, because cotton is very thin, so need a little bit of glue to fix it. This is the easiest step in the whole process, and after about 30 minutes, you can start the next step.
Step four: absorbent cotton wool
Here, you can see the effect of the entire coat is covered with cotton. The appearance is not perfect, but the absorbent cotton is essential, it helps LED light divergence.
Step five: plastic sheet
Easy to use cotton, plastic film to cover the entire jacket. Here is a very thin plastic film material, and then cut into different parts of the size of the coat, these parts wrapped around the jacket, and then welded together with hot glue gun. Thin plastic sheets melt very quickly, for highly important parts, use highly flammable spray adhesives.
Step six: color
After the jacket is covered with plastic film, it looks like a sandwich. A blue transparent coating is selected to be sprayed onto the surface of the plastic film to complete the work of the encapsulated optical element.
As is shown in the figure, the jacket looks good now, and the hazy appearance can make the light shine better.
For more information about LED, please click on China LED network or pay attention to WeChat public account (cnledw2013).
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China