Avago launched the first "plug and play" RGB high power LED lighting module

Avago announces the launch of a pair of high performance 24W red, green and blue (RGB) light emitting diode (LED) modules for a variety of decorative, architectural and professional lighting applications. This is the first in the industry to provide up to 480 lumens of light output of the new high power LED module, suitable for simple and easy to use and can display a variety of color solutions customers.

Avago ADJD-MJ50 (top emitting) and ADJD-MJ60 (side emitting) LED module, small size, can be vertically or horizontally stacked, to achieve the required light output. They are the best choice for interior and exterior lighting designers, and are suitable for applications such as arch lighting, wall cleaning, down lighting and external front lighting. These RGB LED modules are also the ideal light source for Avago's proprietary color management solution that enables end users to set and maintain consistent color points throughout the life of the lighting device.

In addition, provides higher performance and flexibility of the LED module for application specific task lighting and atmosphere lighting, LED lights and other professional. These LED modules will be a combination of brightness and reliability, can be used for advertising backlight and other signs to provide a flexible solution.

Lighting designers, manufacturers and architects are increasingly interested in high performance, low voltage wiring and long life of the combination of solid state lighting. These applications require high brightness output and effective dispersion of LED light source generated heat. Avago's new RGB LED module for various lighting applications and optimization, the price competitive, and has very high reliability.

The current RGB LED lighting assembly is typically a combination of a large number of individual power LED assembled and wired by the lighting equipment manufacturer. Avago's solution is a plug and play integrated solid-state light source. The utility model is packaged in a metal package with small size and convenient installation, and is provided with an integrated power supply connector which is convenient for connecting the radiating fins. This will greatly simplify the difficulty of manufacturing lighting equipment, help to reduce production time and cost, and does not require a two assembly process, from investing in expensive assembly equipment.

The main features of

Red, green and blue Avago ADJD-MJ50 transmitter and ADJD-MJ60 in rated current to 100% duty cycle drive, the continuous light output of 480 lumens (at 9000 K color temperature for white output adjust, approximately 310 lumens). Its built-in heat sink (the thermal resistance between the LED connection and the bottom of the package is only 2 degrees C/W) and the mechanical installation can effectively transfer heat from the LED to the lighting device. This allows these LED to be able to operate at high drive currents (up to 750 mA) while minimizing connection temperature, simplifying the thermal management of lighting design.

The LED chips with very long service life are made of silicon resin material, which is installed in the cavity of the reflector. The optimized optical design is combined with a very spaced emitter to maximize the light extraction capability and achieve maximum efficiency. It also combines red, green, and blue chips in advance to achieve a unified color in the entire lighting mode. With this feature, designers no longer need to provide additional optical hybrid optical devices.

Avago new high power RGB LED module package size as follows:

ADJD-MJ50: 100 mm (length) mm (W) x 18 x 3.6 mm (high) ADJD-MJ60: 100 mm (length) mm (W) x 18 x 8 mm (high)