Daily how to clean lighting fixtures?

Introduction: Nowadays, people's living standard has been improved, and the requirements of the LED lamps for interior decoration are higher and higher. Especially after 80 young people, but now the price for ordinary people is the price, buy a new house, a lifetime of at least half of the time is for the house in the struggle, that is what we call the slaves. Today's young people to decorate the new house, it can be said that the painting is a beautiful picture, decoration decoration process is like a painting process. Is the lighting and decoration of this picture is the punchline, light our eyes.

However, we installed lighting without proper cleaning and maintenance, so high-end lighting will soon become intense darkness without light. And other furniture, lamps and lanterns also need regular cleaning and maintenance, in order to maintain the brightness of the lamp, prolong lamp life.

We are aware that it is best not to wash clean, as long as the dry cloth wet wipe, if accidentally hit the water to dry, should not turn on the lights immediately after with wet dishcloth, because of high temperature water burst bulb. You can use a light cotton socks or cotton hand in hand to wipe the condom, gently wipe the lamp, do not arbitrarily moving parts inside the lamp.

LED lamps should be strengthened in use, in order to extend its service life. The room lamp must often wipe with dry cloth, and pay attention to prevent moisture intrusion, in order to avoid a long time corrosion damage or leakage short-circuit phenomenon; installed in the toilet and bathroom lights shall be fitted with a waterproof lampshade, otherwise it will greatly shorten the service life of the lamp should be installed in the kitchen; pay special attention to smoke, because the accumulation of grease effect of light illumination; light transmittance of the lampshade is good, but easy to stick dust, we must be diligent in cleaning, so as not to affect the degree of penetration of light; if the lamp is made of non metal, can use wet cloth to wipe, lest prevent dust accumulation, lighting effect.

Do not frequently switch to pay attention in the use of lighting, because the lamps in the frequent starting of the moment, the maximum current through the filament current is greater than the instantaneous normal working hours, frequent start will make the filament temperature increased sharply accelerated to sublimation, will greatly reduce the service life, so to minimize the lamp switch.