LED light quality you understand? (two)

The answer is yes, you can do some special surface treatment technology on the two optical devices to reduce the separation of LED spectral distribution. There are a variety of surface light treatment technology, from the most simple to the surface of the matte surface, and then to the complex surface treatment of light treatment technology.

Compared with the surface of the matte matte surface control technology, the RZ mixed color surface treatment technology can maximize the uniformity, light control and efficiency is very high. What is the principle? Look at the diagram below:

The light mixing technology of this special, difficult in the groove design and grasp the surface, only to be able to put out the TRI optical design of LED after the original light again, close to the original LED light quality problems, but also to ensure two points, first, not to change the original design of the TRI optical application perspective, second. To ensure a high optical efficiency. At present, we can guarantee the efficiency of the mixed light effect is not more than 70%, the new patent mixed with optical technology to achieve the highest efficiency of optical devices up to 90%.

After finishing the principles and characteristics, the application of this mixed light surface treatment technology is the main direction of where? This problem is better, in this society if there is no practical value of the technology, it is a waste of resources. The main use of the direction, about several.

1, RGBW LED and other colors can be freely combined with light, no longer need to worry about the different colors of light color matching color stratification, arbitrary regulation can do; stage lighting, architectural lighting, accent lighting, intelligent lighting etc..

In 2, LED in power: the power chip compared to high power chip has a high price, the future market will continue to expand, but the original light quality in power LED is relatively low, the two optical design and application requirement is higher, the surface light mixing technology will play a major role the.

3, according to COB, currently on the market a wide variety of COB chip, even two times uneven in quality, the optical scheme for the first-line brand in the world with COB may have the following types of spot, on the left is very pretty good, right there is obvious separation phenomenon. If the use is not doing so well the COB chip, this phenomenon will be more serious, it is insufficient for this chip, can also use the surface mixed two times, light light illumination correction technology, obtain good effect.

In summary, LED light quality is very important, the light is not lit up, but to make good use of light. Do a good job of light, do a professional lighting, good light!